FA7, the first Quad drivers IEM from FiiO , all Knowles BAs and 3D printed technical , MMCX design
Apr 6, 2020 at 10:02 AM Post #648 of 680
I'm not too sure why there are not more positive comments, the fa7 sound warm and cosy with the right eartips, i use spinfit cp24 and they fit me well

d
I would agree I have three fiio iem's fa1,fh5, & fa7 and the fa7 is what I choose most often.

I might add for the poster from France the fa1 and fa7 have nearly the same size nozzle and if a fit for fa7 is problematic the fa1 will not be an improvement for fit.
 
Apr 6, 2020 at 10:17 AM Post #649 of 680
I would agree I have three fiio iem's fa1,fh5, & fa7 and the fa7 is what I choose most often.

I might add for the poster from France the fa1 and fa7 have nearly the same size nozzle and if a fit for fa7 is problematic the fa1 will not be an improvement for fit.

Thanks for your answer but my fitting problem is not about the nozzle but with the rear of my concha.
 
Apr 14, 2020 at 5:42 AM Post #651 of 680
Hi there, very interesting reading your posts here. Based on your comments i bought first the fa7 and then btr5 (i had the btr3) and se cable. What a difference spacious sound between 3 and 5.

i had lots of fun listening the fa7 but now i have little problem the left fa7 doesnt work there is something with the connector i think. The problem is also with 3.5 cable. When in look inside the connector i dont see something. Any tips other then sending it back to fiio?
 
Apr 14, 2020 at 6:51 AM Post #652 of 680
Hi there, very interesting reading your posts here. Based on your comments i bought first the fa7 and then btr5 (i had the btr3) and se cable. What a difference spacious sound between 3 and 5.

i had lots of fun listening the fa7 but now i have little problem the left fa7 doesnt work there is something with the connector i think. The problem is also with 3.5 cable. When in look inside the connector i dont see something. Any tips other then sending it back to fiio?
Tried a different cable? Also tried contacting the dealer you got it fromfor a replacement?
 
Apr 15, 2020 at 4:47 AM Post #654 of 680
Hi thanks, yes tried an different cable and send an mail to FIIO.
The issue doe not locate in the other cable, right? If the headphone is still within the warranty, you could try to contact the seller for help first.
And you could also try to gently pry the small, notched ring on the MMCX's head into a larger diameter to see whether it could help?

FuPu67RAQB_EpvUKvwuWP-uLX_j4

Best regards
 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com support@fiio.com
Apr 15, 2020 at 5:12 AM Post #655 of 680
The issue doe not locate in the other cable, right? If the headphone is still within the warranty, you could try to contact the seller for help first.
And you could also try to gently pry the small, notched ring on the MMCX's head into a larger diameter to see whether it could help?

FuPu67RAQB_EpvUKvwuWP-uLX_j4

Best regards

Hi, thank you for your reaction! Indeed no problem with the cables. Tried both your cables se and 3.5. Did make the ring a little bigger, still no sound. Was worth to try. I will contact the seller.
 

Users who are viewing this thread

Back
Top