Custom made for Hugo TT2can anyone help me find an adapter to connect the 4 pin vivo balanced cable to chord tt2s XLR 3 pin sockets?
it seems like it might be necessary to get a custom adapter made up, if so, can i get someone to confirm this is the XLR pin wiring configuration (i got this from dans web site for a cable jack):
and this is the cable :
https://www.headamp.com/products/dan-clark-audio-vivo-premium-headphone-cable-for-ether-aeon-models
LEFT:
RIGHT:
- 1 = L+
- 2 = L- (or ground for single ended cables)
- 3 = open
- 4 = open
- 1 = R+
- 2 = R- (or ground for single ended cables)
- 3 = open
- 4 = open
I also found this post, but i'm just checking:
https://www.head-fi.org/threads/ether-2-impressions-and-discussion.890282/post-15004872
so this picture seems to be for the right connector.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
ETHER 2: Impressions and Discussion
- Thread starter MattTCG
- Start date
ZappaMan
Headphoneus Supremus
Thank you. Can I ask who made your connector ?Custom made for Hugo TT2
There is a local shop in Jakarta-Indonesia that sell the cable to make that adapter.Thank you. Can I ask who made your connector ?
But i provide the XLR .
The configuration is provide using Hugo TT2 forum for 4 pin xlr.( i don't remember which pages ).
For Ether 2 , i don't know if useful or not as ether 2 is not to hard to drive.
I am using it for abyss, but i prefer the 6.3mm as it have more transparency.
If i have a jps cable for making that adapter maybe i can comment on the transparency.
ZappaMan
Headphoneus Supremus
thank you, i bought the headphones second hand and they come with this cable, so I'm just trying to find a way to connect it up, i would have preferred single ended too.There is a local shop in Jakarta-Indonesia that sell the cable to make that adapter.
But i provide the XLR .
The configuration is provide using Hugo TT2 forum for 4 pin xlr.( i don't remember which pages ).
For Ether 2 , i don't know if useful or not as ether 2 is not to hard to drive.
I am using it for abyss, but i prefer the 6.3mm as it have more transparency.
If i have a jps cable for making that adapter maybe i can comment on the transparency.
ZappaMan
Headphoneus Supremus
interesting dilema then, do i ask the cable guy to terminate the balanced cables in XLR or to a standard headphone jack (i dont even know if thats possible with a balanced cable)?There is a local shop in Jakarta-Indonesia that sell the cable to make that adapter.
But i provide the XLR .
The configuration is provide using Hugo TT2 forum for 4 pin xlr.( i don't remember which pages ).
For Ether 2 , i don't know if useful or not as ether 2 is not to hard to drive.
I am using it for abyss, but i prefer the 6.3mm as it have more transparency.
If i have a jps cable for making that adapter maybe i can comment on the transparency.
you can make the 6.3mm to 4pin xlr, or buy from amazon.thank you, i bought the headphones second hand and they come with this cable, so I'm just trying to find a way to connect it up, i would have preferred single ended too.
Attachments
ZappaMan
Headphoneus Supremus
Thank you, you may have just saved me a lot of money that I cant particularly afford !you can make the 6.3mm to 4pin xlr, or buy from amazon.
Can anyone recommend a quality version of this connector rather than myself buying blind ?
edit: i cant actually find a female 4 pin xlr adapter to 6.3 or 3.5 mm adapter.... seems getting a custom termination is the only possible approach.
Last edited:
you can reterminate the balanced cable to single ended cable.Thank you, you may have just saved me a lot of money that I cant particularly afford !
Can anyone recommend a quality version of this connector rather than myself buying blind ?
edit: i cant actually find a female 4 pin xlr adapter to 6.3 or 3.5 mm adapter.... seems getting a custom termination is the only possible approach.
ZappaMan
Headphoneus Supremus
And if the cable guy asked me to describe the cable in terms of what goes where, is that information available ?you can reterminate the balanced cable to single ended cable.
I think the cable guy should know base on the ohm meter on cable plug ether 2.And if the cable guy asked me to describe the cable in terms of what goes where, is that information available ?
Right pin1 R+ pin2 R- ; Left pin1 L+ pin2 L- ; and then he can make 6.3mm base on that, R /L and ground is negative together.
or you can ask Dan here to make sure ?
Attachments
ZappaMan
Headphoneus Supremus
https://www.head-fi.org/threads/ether-2-impressions-and-discussion.890282/post-15634959Dan has provided the XLR wiring details, and the second column shows how to connect it to a single ended adapter.
please check again with ohm meter, and do it at your own risk .
i am just trying to help.
Attachments
Last edited:
After an additional 25 hours of listening to the Ether 2s, I have made several edits to my Ether 2 impressions. In brief: I would not recommend pairing the Ether 2 with a Liquid Platinum amp. (changes in italics)
Users who are viewing this thread
Total: 2 (members: 0, guests: 2)