I have no problem buying to US ellers, but Amazon won't send much of those products. But Paracord Galaxy and a lot of others does, so for me it is more about finding the appropiate product than were to buy it.
I have no problem buying to US ellers, but Amazon won't send much of those products. But Paracord Galaxy and a lot of others does, so for me it is more about finding the appropiate product than were to buy it.
Okay, first post after lurking and finding some info on DIY cables - 400 pages is alot, and i'm pretty sure the info i'm looking for is somewhere hidden in here, and most of my questions i already found answers.
Now i want to make a cable for my hd650, i bought 24awg cable, PTFE and silver coated copper, paracord 100, some hd650 connectors from ebay/china.
What i'm missing is the 6,3mm connector and/or balanced out (will make both cables, likely). Not sure what to get, any recommendations of something that looks good and is available in europe? (but not too expensive for my first cable). also heatshrinks, for the connector sides and the Y splitter in the middle (likely getting viablue splitter) - i have no idea what size i should get and what shrinking factor i should get. also with glue, without? no idea.
anything else i'm missing for this, that i forgot?
Okay, first post after lurking and finding some info on DIY cables - 400 pages is alot, and i'm pretty sure the info i'm looking for is somewhere hidden in here, and most of my questions i already found answers.
Now i want to make a cable for my hd650, i bought 24awg cable, PTFE and silver coated copper, paracord 100, some hd650 connectors from ebay/china.
What i'm missing is the 6,3mm connector and/or balanced out (will make both cables, likely). Not sure what to get, any recommendations of something that looks good and is available in europe? (but not too expensive for my first cable). also heatshrinks, for the connector sides and the Y splitter in the middle (likely getting viablue splitter) - i have no idea what size i should get and what shrinking factor i should get. also with glue, without? no idea.
anything else i'm missing for this, that i forgot?
Just make a balanced cable and a adapter. I'm sure you can get Neutrik connectors over there. They are rugged and inexpensive. The heat shrink is measured flat across . I'm going with adhesive next time I would advise the same for you. 2:1 is fine for most things 3:1 if you are going to cover the back of a plug and wires 2:1 prolly work most of the time.
Okay, first post after lurking and finding some info on DIY cables - 400 pages is alot, and i'm pretty sure the info i'm looking for is somewhere hidden in here, and most of my questions i already found answers.
Now i want to make a cable for my hd650, i bought 24awg cable, PTFE and silver coated copper, paracord 100, some hd650 connectors from ebay/china.
What i'm missing is the 6,3mm connector and/or balanced out (will make both cables, likely). Not sure what to get, any recommendations of something that looks good and is available in europe? (but not too expensive for my first cable). also heatshrinks, for the connector sides and the Y splitter in the middle (likely getting viablue splitter) - i have no idea what size i should get and what shrinking factor i should get. also with glue, without? no idea.
anything else i'm missing for this, that i forgot?
As Buke said Neutrik is a good choice and should be in other countries. Amphenol also makes some vary good product and you might find their 1/4 inch connectors (6.3mm) in your area. 3M makes a lot of heat shrink tubing. The thin wall adhesive type would be great for your application, stay away from thick wall or double wall, that is out there as well and it can get a little bulky and add extra weight.
I don't have a soldering iron and never done anything like that before. And I assume ordering parts would be a hassle too since I live in Australia and would have to ship everything. On the other hand it would be handy to know how to go about it at least I could consider it. Are there any good video guides?
I don't have a soldering iron and never done anything like that before. And I assume ordering parts would be a hassle too since I live in Australia and would have to ship everything. On the other hand it would be handy to know how to go about it at least I could consider it. Are there any good video guides?
Well, I'm in the making of my first cable. I live in Sweden and ordered everything from US and China. Had an old soldering iron at home. Took some time to watch some soldering videos and then got to work. It is not hard but very rewarding.
Well, I'm in the making of my first cable. I live in Sweden and ordered everything from US and China. Had an old soldering iron at home. Took some time to watch some soldering videos and then got to work. It is not hard but very rewarding.
Turns out my mates got a soldering iron. How much did everything cost you to make a cable? I've emailed Zach from bestintheverse cables but the price is getting up there... so far $140 USD including shipping to Australia for an 8ft balanced cable. Alternatively I found a cheap balanced cable from customcans for less than half that price.
Well, I'm in the making of my first cable. I live in Sweden and ordered everything from US and China. Had an old soldering iron at home. Took some time to watch some soldering videos and then got to work. It is not hard but very rewarding.
Turns out my mates got a soldering iron. How much did everything cost you to make a cable? I've emailed Zach from bestintheverse cables but the price is getting up there... so far $140 USD including shipping to Australia for an 8ft balanced cable. Alternatively I found a cheap balanced cable from customcans for less than half that price.
It depends on the materials. What headphones are they for? Do you want to braid cable, or is a thinker cable, like that on the Breyer T1, ok? Do you want a nylon sleeve? Many questions to be answered.
It depends on the materials. What headphones are they for? Do you want to braid cable, or is a thinker cable, like that on the Breyer T1, ok? Do you want a nylon sleeve? Many questions to be answered.
Im just realising how crazy some of these prices are just for materials. I was on the phone to a guy who sells furutech stuff, he used to sell Viablue but doesn't anymore. Says that Viablue are not very good because it's made from brass and they don't sound good. Wouldn't my stock hd650 cable be brass too? I'm confused on what I should be considering for connectors now and not keen on spending more on cables than what my 650's cost me that's for sure.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.