[Tom-s]

I can't stop thinking about it. Correct me if I'm wrong but the BHC can take 6SN7s with adapter, right ?

It's possible to build it with 6SN7's from the start. For a first timer build i wouldn't recommend this. As this would void any warranty from the start. And has the risk of destroying the top plate in the process.

Here's a sample build with 6SN7 as driver tube. I've done several and like the 6SN7 tube a lot in this position.

 

[Deceneu808]

Like Cuban cigars

 

[HTSkywalker]

Like Cuban cigars

Happy with the glow, Wait until it starts smoking

 

[Deceneu808]

Happy with the glow, Wait until it starts smoking

Not allowed inside the house

 

[HTSkywalker]

Not allowed inside the house

Not sure it's an option with the DV not smoking at some point

 

[Deceneu808]

Not sure it's an option with the DV not smoking at some point

I'll just move it outside then. Let it smoke under the sun at least. I'll have the fire hose ready

 

[HTSkywalker]

I'll just move it outside then. Let it smoke under the sun at least. I'll have the fire hose ready

Just kidding, I believe the DV has been refined over a period of years and most incidents are related to the 110V version.

 

[JKDJedi]

Not sure it's an option with the DV not smoking at some point

Tell me about it..

 

[JKDJedi]

Like Cuban cigars

Just noticed your sig...which cans (headphones) do you enjoy (gets the most use) with the Darkvoice?

 

[Deceneu808]

Just noticed your sig...which cans (headphones) do you enjoy (gets the most use) with the Darkvoice?

HD600 are my fav by far on the DV

 

[SHIMACM]

HD600 are my fav by far on the DV

I still have to test this phone on my Darkvoice.

I already had the HD600, but at the time I had a Little Dot MK IV, way inferior to Darkvoice.

I have to test an HD650 too.

So far I've only used the T1 on it.

 

[HTSkywalker]

I still have to test this phone on my Darkvoice.

I already had the HD600, but at the time I had a Little Dot MK IV, way inferior to Darkvoice.

I have to test an HD650 too.

So far I've only used the T1 on it.

Am using the Elear on it with wonderful results although it's 80Ohms but @Paladin79 also enjoys his 80Ohms Utopia on most of his tube amps

 

[Slade01]

Am trying to open up the DV to do a mod or 2. Is there anything else holding down the bottom panel aside from the 6 screws? I can't seem to get it off, and I don't want to force it -- or will if there really isn't anything else holding it to the body. Thanks.

 

[Paladin79]

Am trying to open up the DV to do a mod or 2. Is there anything else holding down the bottom panel aside from the 6 screws? I can't seem to get it off, and I don't want to force it -- or will if there really isn't anything else holding it to the body. Thanks.

I count 8 screws, three on each end and two in the middle.

 

[Slade01]

I count 8 screws, three on each end and two in the middle.

lol. I just figured that out. i guess they are (in chinese) warranty void stickers or something cover the two middle screws. because the only mandarin i know is the oranges and not the language...

thanks!