Which video on YouTube? I have a fresh set of pads here but I haven't gotten around to doing the swap yet. Any tips to share?
What i would do differently:
When swapping pads, put a sock over the other headphone element to prevent scratches.
Instead of pulling from the gimbal, try to pull from the top, glue was not as stuck there
Inset a plastic tool, or a finger in the crease you create and apply only slight force when removing,
so that the most or all of the glue will be removed with the pad.
I used a finger, but could have used a plectra.
The seam did not align with the cable insert, so don't try to force it there. It is slightly off.
Gently press the bottom and top parts down and check that sides align aswell.
Last edited: