[HTSkywalker]

LOL...I recommend some roller feet so that you can have Rock N' Roll

Or some rockers even for that same purpose lol

 

[HTSkywalker]

Joke aside, there are too many choices for feet.

The decorative metal feet above seem pretty nice.

You can also consider feet that are more geared towards vibration/shock isolation, like these:

The golden ones would go nicely, same as the golden knob on the BHC

 

[HTSkywalker]

What type of stone is that? Soapstone? Marble? Granite? Must have some heft to it.

Looks like granite to me, pretty innovative

 

[wabibito]

An absolutely self-indulgent and purposeless "upgrade" to my BHC. Why, you ask? Because I'm a fan of Hard Rock! Yes, I'll be using this pun quite often moving forward...

Also, please recommend some feet that would go nice with this!

Man that thing is a beauty.

 

[HTSkywalker]

Finally finish the speed ball and the mod. Boy this sound great. Learned a trick while studying the build reversed the 100uF so it folded nicely under the speedball.

Good job there, Is that a 6080 Power tube in the back ?

 

[wabibito]

Good job there, Is that a 6080 Power tube in the back ?

Yup. The default tube

 

[HTSkywalker]

Yup. The default tube

So a 6AS7G would also also work ?
How about the pre-amp tube, would 6SN7 fit with or without adapter ?

 

[skhan007]

What type of stone is that? Soapstone? Marble? Granite? Must have some heft to it.

Is that granite ? looks awesome
Definitely needs some stand offs for ventilation

Yes, granite! Very hefty.

 

[wabibito]

So a 6AS7G would also also work ?
How about the pre-amp tube, would 6SN7 fit with or without adapter ?

I assumed the 6AS7G should also work. The front tube is a 9 pin. I do have a garage1217 adapter to 6SN7 that i use for my project ember II. Though from what i read the voltage or something need to change for it to work with 6SN7. When i get my own crack, I will try it out.

 

[wabibito]

Next stop is replace the film cap. These square ones fits better on one side. I made a case for it so the idea is to clip it on to the headphone jack and the corner screw of the transformers so I dot have to drill any hole.

 

[cebuboy]

So a 6AS7G would also also work ?
How about the pre-amp tube, would 6SN7 fit with or without adapter ?

Yup 6AS7G works nicely and 6SN7 too with an adapter, I use the Garage 1217 adapter in mine.

 

[wabibito]

Yup 6AS7G works nicely and 6SN7 too with an adapter, I use the Garage 1217 adapter in mine.

do you need to modify anything? would the amp provide enough power?

 

[skhan007]

I believe the speedball mod and adapter are all you need for 6sn7.

 

[cebuboy]

do you need to modify anything? would the amp provide enough power?

Speedball and adapter, you are good to go.

 

[HTSkywalker]

Good to know as I have lots of the Darkvoice tubes 6080, 6AS7G, 6SN7, dual 6J5 etc. and would love to use in a BHC, I believe the speedball is mandatory in any Crack no matter what.