So I tried to fix my volume intensity with this fix from the FAQ portion of Bottlehead's site:
3. I can barely turn my Crack up at all before it's far too loud, what do I do?
Disconnect the white wire at the pot that originated at the left RCA jack. Install a 75K resistor between this wire and where it connected on the pot.
Repeat this step for the red wire coming from the right RCA jack.
Attach and solder one 33K resistor between each outer pair of lugs on each level of the volume pot.
Resistor wattage is unimportant, 1/10 Watt or greater will work nicely.
When I completed this, the left side as louder than my right side, resulting in a channel imbalance. In my infinitely intelligent brain, I decided to remove JUST the 75K resistors, leaving the bridged 33K resistors on the volume pot. I turned it on and tried on the headphones and now I cannot hear anything. Even after removing all the resistors. If I turn the volume all the way up, I can SLIGHTLY hear music.
Does anyone know what I broke? Or rather an educated guess? It has speedball installed.