robcrx352
New Head-Fier
My cable is just 0.75m long. The cable has a separate Etherchannel ( see picture below)
Robert
Robert
I just wanted to say that I now found the solution of the probem.My cable is just 0.75m long. The cable has a separate Etherchannel ( see picture below)
Robert
Just picked up an idap-6 and using mconnect player for ios to stream Tidal to my DAC - works great but I can't get the album art to show on the idap -- how can I accomplish this?
I have the same problem. Artwork is just displayed when using Airplay/Bluetooth. I also have problems with gapless music in Mconnect: i always get a small break between music titles even when music stays in the same sampling rate
Stay updated on Cayin at their sponsor profile on Head-Fi.
|
I just picked up one of these and am having the exact same issue, except reversing steps 4 and 5 doesn't work either - in both cases I get an "upgrade file not found" error message. Did you ever resolve your issue?> Firmware Upgrade Procedure
1. For safety reason, please make sure the iDAP-6 will not power off during firmware upgrade process
2. Download the latest firmware from Cayin website (www.cayin.cn). The firmware package should be downloaded as iDAP-6 V1.1.zip
3. Decompress and copy the iDAP-6 firmware file (update.upt) into the root directory of a SD card.
4. Insert the SD card into iDAP-6 and select System Upgrade under System Setting Menu
5. Select System Upgrade in the submenu, the system will complete the upgrade process automatically, and reboot the player after update is completed.
6. When the upgrade is completed, you can verify the current firmware version number by selecting “About Player” option under “System Setting” menu,
---
Hm.. Update does not start automatically if I try to insert SD-card first (4) and then try to run 'System Upgrade' in the submenu (5). Reverse order works fine: at first run 'System Upgrade' in the submenu (5) and then insert SD-card into the iDAP6 (4).
I just picked up one of these and am having the exact same issue, except reversing steps 4 and 5 doesn't work either - in both cases I get an "upgrade file not found" error message. Did you ever resolve your issue?
Stay updated on Cayin at their sponsor profile on Head-Fi.
|
Hi Andy! I successfully upgraded over the weekend - I was using a 512GB SD card without realizing the slot read a max of 256GB. Nothing more than a DFU interface problem....What is your current version of firmware?
I may have my answer here as I have a WD NAS (Ex2 Ultra with OS5), it would be good to have some confirmation as the (few) french users reviews are quite bad on average (either very good or very bad) and that this device seems completely abandoned (which is not a good sign). I can live with AirPlay 1 (the release date is incompatible with AirPlay 2 so I have my answer too) 16/48Khz because that is enough.@Andykong Please check compatibility with QNAP NAS, seems it works via DLNA only, IDAP-6 can not find it itself. WD MyCloud (twonky based) works fine.
hmmm - i think you should try another card... when i buy my Idap-6 i use Samsung 128 mb sd card and from time to time i have some drop outs or even freeze whole thing so i have to restart Cayin. Never have this problem with hard drive but also in meantime i buy new card (kingston 256) and it works without problem...Another issue : music on SD card mostly does not work. Scanning music library makes the iDap-6 shutting down, I removed tracks and it completed. However, some tracks skip by themselves so it is not usable. It even stated that tracks were not playable...even if it is an exact image of my HDD (which hopefully works flawlessly, but I cannot then close the front gate). Is my unit defective of is it known issue ? I have a Samsung Class 10 UHS-I microSD card which has no issue on computer. I feel like the unit just lacks processing power.