Any word from them yet? They do ship fast. It was send out the day after ordering. It better not be DOA or something.
Got the refund, yeah.
Any word from them yet? They do ship fast. It was send out the day after ordering. It better not be DOA or something.
If you're sensitive to brightness/treble, it won't help either set of cans. You can smooth it out a bit with a mullard or amperex tube but, it can only do so much.I am interested in going to a tube setup and was curious how well this pairs with T90 or HE400?
If you're sensitive to brightness/treble, it won't help either set of cans. You can smooth it out a bit with a mullard or amperex tube but, it can only do so much.
I've joined the T1 club!
Having just purchased a T1, what should I be doing to ensure I don't blow it up after I flick the switch. I'm located in Australia where we run off of ~230V 10A circuits, and the T1 I've picked up comes with the EU adapter I believe. I've purchased a 1.6A quick blow fuse to put in once I receive the unit... is the rest as simple as getting a wall plug adapter?
Wonder if anybody took the plunge on the Siemens E88CC which CoiL is raving about.
Right now, I'm still using my trusty Amperex OG which is amazing but if there's anything better out there, I'd definitely be all ears.
Followed the advice from the OP of this thread who stated that another tube is "better" in his view ; http://www.audiokarma.org/forums/showthread.php?t=567610&highlight=aune+t1
Bought the GE that he gave the biggest marks to and I guess it's because he uses a tube amp as well but I find that although it has good articulation, that it's quite bass shy. His comments on the bass seem to insinuate that he has a bass-heavy rig or at least is predisposed to having natural bass extension. My guess is the Amperex OG tube pushes it over the top and therefore the user finds it to be too much.
If you're interested in the tube, let me know and I could sell it to you. Otherwise, I'll keep it for troubleshooting purposes and as a spare in case anything happens to my beloved OG.
I am interested in going to a tube setup and was curious how well this pairs with T90 or HE400?
I also have a Siemens E88CC and it has the most bass compared to any of the other tubes I've tried.
If you're into bass, and also want nice extended, airy highs I recommend it.
Hmmm interesting. I bought some GE "Smoked" 6DJ8's a while back because somebody else recommended them here, I think they were listening to electronic music.
I've decided to pop one in this week and let it burn in... it actually sounds to me like so far the emphasis is on the mids, a bit lower pitched than the OG which I find has this slight emphasis on the high mids and seems to make vocals sound very 3d to me. Electric guitar and cello is sounding very nice (listening to Andrew Bird). Also surprisingly seems to have a pretty large soundstage so far. I'll let it burn in for a good 20-30 hours and see how it sounds... very surprised reading the comments on AK, although that is an ECC86 made in Holland. My GE's are 6DJ8's from the states (purchased cheap on ebay... I think they went 2 for $20 with shipping).
Anyone roll GE's a lot with their Aune T1 and want to chime in? I'd love to hear more impressions.
Anyone roll GE's a lot with their Aune T1 and want to chime in? I'd love to hear more impressions.
According to your short review elsewhere in this thread, the Siemens has a narrower soundstage than the Amperex. Is that still your verdict?
Are there any other attributes that you found are in stark contrast between the two?
Well, I bought the GE that this poster gave the top marks to and was a little disappointed.
I found it to be anemic in the bass department, although it does have a nice organic articulated midrange and clear highs. If somebody is trying to tame some cans that are a little bass-heavy, I'd recommend that tube for sure.
I'll be getting my french ECC189 in something like a week, which will bring my total tube collection to... 7?
So far my favorite tube is the Holland ECC85/6AQ8, originally had a GE one that went bad so now I'm using an RCA(Amperex made in Holland) that's close enough that it's still my favorite.
For those who would care to hear what I say, here is a rough list of preference based on general usage and mostly with EQing of some sort, I'll try and get reviews going at some point without using EQ so things are a little more honest but in the meantime
For reference I mainly use my DT990s with the T1, if anyone wants me to give a review using other cans I also have in my possession: DT770s, Senn HD280 PROs and MDR-V6s.
If anyone is curious I can also give some comments about using my FiiO E17 as an amp too, though I don't use it for that too often as I'm pretty satisfied with the T1 amp.
But for now my rough list:
1. ECC85/6AQ8 GE Made in Holland 4.5/5 - These came the closest I've heard to a perfect match for my DT990s, good bass, very clear and very very wide soundstage, feels like you can close your eyes and pretend you're in a concert hall. Unfortunately developed strong noise in the right channel on low frequencies. Great bass, good mids and great highs.
2. ECC85/6AQ8 RCA(Amperex) Made in Holland 4.25/5 - Been using this one for nearly a week, so far it feels like it's not as clear as the GE but that very well could be my imagination combined with my using EQ. Wish I could compare it to my GE 6AQ8, might still give it a go since at least one channel sounds fine. Great bass, good mids and good(for now) highs.
3. ECC88/6DJ8 GE Made in USA 4.0/5 - These came close to the 6AQ8 in terms of the highs, mids, and lows but I feel like the soundstage is much narrower. Haven't done much A/B testing though so not entirely too sure how it compares. Also I can't remember if it was the GE or Sylvania that had better bass. Good bass, mids and highs
4. ECC88/6DJ8 Sylvania Made in USA 4.0/5 - See above for the GE 6DJ8, mostly the same sound, need to do some testing for review.
5. ECC88/6H23N Vokshod Made in Russia 3.5/5 - Decent sound but felt lacked some clarity and had a narrow soundstage. Good bass, decent mids and highs. I think these are pretty cool because they're from Soviet Russia, I got a pair for cheap(they only had pairs for some reason...) and you can see the CCCP logo on one of them.
6. ECC88/6922 Electro Harmonix 3.0/5 - Better highs, more clarity and slightly wider soundstage but worse bass. Don't remember mids enough to comment.
7. ECC85/6AQ8 Mullard Made in Britain ?/5 - Mad noise on both channels, much worse than GE 6AQ8. $23 down the drain lol.
That's it for now, I'll have a more detailed and accurate list later that'll also include the ECC189.
A word of warning for anyone thinking of picking up a 6AQ8 tube, they don't always play nice with our T1 so you may end up getting a "bad" tube or two depending on your luck, it may be wiser to try other alternatives if you're strapped for cash; The 6DJ8 USA tubes are quite excellent for the money.
I'll probably pick up a Siemens E88CC at some point to see if it's claim to fame bass is accurate.