sajunky
Headphoneus Supremus
Yes, flashing may pass, while some locations produce unstable result. This is a hardware fault, if it happened more than once, it indicate that there are weak cells and reprogramming in future should be avoided. Upload the best firmware, and stick to that version.He did not alter inputs, but will check & report back.
Slight issue we had when I first updated the firmware & went through the procedure which was 100% successful.....but could not get a sound out of the Di20.
Re-did the procedure, and second time it worked, & everytime after that as we sampled the different FW's.
It can be also non-volatile memory chip losing configuration, it is worth to try first what @gimmeheadroom says. Also try to power off, disconnect all other devices and leave it for few hours. It will discharge internal static electricity that device could be exposed to.
Last edited: