raoultrifan
Headphoneus Supremus
I don't think this cable is shielded and I can't recommend you spending additional money for a new cable because is really expensive.
Instead I can recommend you to manufacture your own power cable by yourself, based on a lot of DIY tutorials over Internet (between 20 to 35 USD per 1.5m of shielded cable) or at least add some "3M flex braid shield" over the existing power cable and connect it directly to power outlet's ground if possible (please, be careful with this and don't do it if you don't feel comfortable working with electricity!). You can cut the cable and remove the power plug so you can connect this 3M braid, then buy a new power plug too. Do not connect the 3M braid to Audeze Deckard metallic case, just isolate 3M braid and only connect it to power outlet's ground!
In case you don't feel comfortable working with electricity, feel free to use the 3M flex braid shield over the existing power cord and just connect it to metallic case of your Deckard (Don't connect it to power ground as well! This shield can only be connected to either metallic case of your amp, either to electricity power ground).
Instead I can recommend you to manufacture your own power cable by yourself, based on a lot of DIY tutorials over Internet (between 20 to 35 USD per 1.5m of shielded cable) or at least add some "3M flex braid shield" over the existing power cable and connect it directly to power outlet's ground if possible (please, be careful with this and don't do it if you don't feel comfortable working with electricity!). You can cut the cable and remove the power plug so you can connect this 3M braid, then buy a new power plug too. Do not connect the 3M braid to Audeze Deckard metallic case, just isolate 3M braid and only connect it to power outlet's ground!
In case you don't feel comfortable working with electricity, feel free to use the 3M flex braid shield over the existing power cord and just connect it to metallic case of your Deckard (Don't connect it to power ground as well! This shield can only be connected to either metallic case of your amp, either to electricity power ground).