[TheVortex]

comparison please, vs 9038s
thank you,

I don't own the 9038s but I have heard it is good.

 

[bavlf]

I wonder if the e1da sound better than some portable dac/amp,
I could use it on the go and on my desktop pc,

that's the why

I understand better ! Of course it will be an excellent dac amp with a windows or linux PC, much better than a lot bigger !

 

[dialogue]

guys can you help me choose, e1da 9038D or Kuang Pai 2 Plus ?
just focus on female 3,5mm/single ended. not the balance.

which one of more POWERFUL and better TECHNICALITIES of Single Ended DAC dongle, 9038D or Kuang Pai 2 Plus?

Just info :
Kuang Pai 2 plus, have 2,5 Vrms in single ended / 3,5 mm .
i dont know how to read this. what is mean connect to powerful output of DAC.

thanks before, for helping me.


nb.
i will use on my smartphone Poco x3 and spotify premium.

 

[artpiggo]

I dont know about kp plus but e1da, you will get a very good support in the discord community. FW support and app support.

 

[fokta]

V1 is just a digital transport without any Audio chips inside. What you're referring to is the V1-A which uses an AK4377 DAC chip.
That being said, why not the V1+9038S?

Yes.
I use them together. I'm quite picky about quality (and spoiled rotten ) and I like them a lot. Like above mentioned, it's not the same thing, but it's a very good combo. If you want even more versatility and still very good sound, I use the Tempotec HD pro with the V1 too, sound is a bit less analytical and can also do DSD. Very enjoyable.

Hi Guys, since you are the one who pop up when I google, I have Tempotec V1 and want to pair with E1da 9038SG33.. but seems a bit issued in cable.. can you advice which cable I have to used ?

 

[Hal Rockwell]

Hi Guys, since you are the one who pop up when I google, I have Tempotec V1 and want to pair with E1da 9038SG33.. but seems a bit issued in cable.. can you advice which cable I have to used ?

Any USB-C to USB-C cable will do.

 

[fokta]

Any USB-C to USB-C cable will do.

I see.. but not working for me.. Even with the cable that come with it.. But work just find to smartphone Android USB C..

 

[artpiggo]

I see.. but not working for me.. Even with the cable that come with it.. But work just find to smartphone Android USB C..

Maybe go ask in discord

 

[theresanarc]

I'm very confused about the firmware for the TempoTec Sonata HD Pro version. For this one, does that whole firmware A/B/C/D mode thing not apply and there's only one firmware?

 

[baskingshark]

The A/B/C/D thing is for the non pro version. So disregard that if yours is the Pro version.

Tempotec Sonata HD Pro has only a firmware update here: http://www.tempotec.com.cn/en/3-Support/index.htm - go to the bottom most links.

 

[piji]

Leaning toward the Xduoo Link 2 rather than the Hidizs S9 for my 11/11 purchase now. I like the idea of buttons for volume and playback control. Might get a Tempotec Sonata HD Pro too just for comparison's sake and maybe gift it or sell it later, since it's so cheap.

 

[]eep]

I

Hi Guys, since you are the one who pop up when I google, I have Tempotec V1 and want to pair with E1da 9038SG33.. but seems a bit issued in cable.. can you advice which cable I have to used ?

I just use any usb-c cable with the V1. To the Tempotec HD Pro, E1DA 9038s or any dac it just works as expected. Teradak in my workshop, Denafrips at home, HD-pro or E1DA on the go... no problem.
The only thing is you need to configure the output on higher rate high-res and DSD (Native, or DOP when dac can't handle native DSD). Some older usb input chips can't even handle over 48, some 96 or 192kHz.

 

[bassct]

If you are looking for top audio quality - e1da 9038Sg3 (2.5mm) and 9038d (3.5mm). All other dacs/amps have more functions/hardware controls. I personally have Link 2 and i like it, good power and hardware bass boost (!). Thinking to try 9038d, but then i need a good source with a robust EQ, good EQ is hard to come by.

 

[artpiggo]

If you are looking for top audio quality - e1da 9038Sg3 (2.5mm) and 9038d (3.5mm). All other dacs/amps have more functions/hardware controls. I personally have Link 2 and i like it, good power and hardware bass boost (!). Thinking to try 9038d, but then i need a good source with a robust EQ, good EQ is hard to come by.

e1da has developed the software to control EQ, filters and many more too.

 

[bassct]

PowerDAC has awesome EQ capability. The 9038 series S and D have an app too, but i think it is just the filter settings and few more, no EQ ( but i havent seen it, so not 100% sure ).