requal
100+ Head-Fier
I think I can stop dispute. I found ePro suitable for this earphone. I must buy them more, cuz I see that they are helpful in many ways. Those are most "unsealing" and light tips which I have.
Good luck
Good luck
I'm not new in this hobby. Even in this moment I have about 16 iems with no problems.My right ear is notorious for causing driver flex with almost all of my DD-containing IEMs, but using the tips as stated by @baskingshark has been effective in preventing it with all of them.
I like ePro ear tips as well.
Do ePro tips run true to size, i.e. if I am medium with most standard tips should I buy these in medium?I'm not new in this hobby. Even in this moment I have about 16 iems with no problems.
ePro are light and pressure unsealing them immediately.
Yes, width-wise they follow that size. But bear in mind they are about 3 mm longer than standard, so depending on the IEM you'll be using them with the depth of insertion may be different (shells may protrude from your ears more than usual).Do ePro tips run true to size, i.e. if I am medium with most standard tips should I buy these in medium?
Size:Do ePro tips run true to size, i.e. if I am medium with most standard tips should I buy these in medium?
I also usually use large size tips, and the large ePro have the largest diameter, at 14.3mm, but the material is very soft, and not stiff at all, so I can’t use the large size tips, as the fold when I insert them. The medium size with a deeper insertion works well for me.G
Size:
Normally I'm using L size tips, but ePro M is most comfortable for me
- S - 9,9 mm
- M - 12,3 mm
- L - 14,3 mm
It's like the spinfit500; too soft..I also usually use large size tips, and the large ePro have the largest diameter, at 14.3mm, but the material is very soft, and not stiff at all, so I can’t use the large size tips, as the fold when I insert them. The medium size with a deeper insertion works well for me.
I didn't know about CP500, I'll check themIt's like the spinfit500; too soft..
I went with Dunu Blanche, pricey but worth it to me for for 2 reasons:Can you guys recommend a cable which brings out the maximum from the TRI I3?
I Found the KBEAR Limpid Pro works well, pure silver and helps to bring a little more brightness up top.Can you guys recommend a cable which brings out the maximum from the TRI I3?
I'd pair it with something that looks good with it. Like the Tri Through.Those metallic shells will go great with the silver colour.Can you guys recommend a cable which brings out the maximum from the TRI I3?
Can you guys recommend a cable which brings out the maximum from the TRI I3?
That or KBEAR's own Tri Through cable.I use the FAAEAL 4 core high purity copper cable:
https://www.aliexpress.com/item/4000400771561.html