The subwoofers are electrically connected, so you would want them on the same strip as the adac an amps as well, or use these to isolate them and dont plug them into the dac/amp strip, they come in 1 channel rca 2 channel, xlr, etc. https://www.parts-express.com/jense...MI7cHssLP94AIVjIbACh0xfQApEAQYBCABEgIQz_D_BwESubwoofers into the Oyaide, but for now they are to wall outlets
What's the power amp driving?Speaker Class D amps
Line 2: Power Amp
The P12 has individual filtering per outlet, that's what increases impedance, however, the p12s information says low output impedance.Just to be clear, are you saying the filtering from the Topaz, in line withe the P12, is increasing the impedance?
Yes one line with the topaz for everything electrically connected. And electrically connected would be via the interconnects, the dac and all the amplifiers. There's no electrical connection between the server and the dac.Are you saying that the ideal might be using one of my dedicated lines for "electrically connected" components and one for everything else?
And which components are electrically connected (through capacitors)? You say not the Dac because it is connected by ethernet, but it is
connected to Power Amp through interconnects, so... I obviously am lost here.
Close, you want the Topaz, dac, and amps together. You could even use a second smaller topaz for the server and/or switch.Dedicated Line 1: Topaz/Oyaide Strip > Digital Components (Dac, Ethernet Switch, Nucleus Server). I think I read somewhere that the Topaz is suited to attenuating
common mode, high frequency noise from digital devices. Do I have that right?
Dedicated Line 2: P12 for Power Amp , Class D sub amps and speaker amps
Is the above ass-backward because it's not the right grouping of components vis a vis electrically connected components?
The topaz reduces common mode noise by 140db and traverse mode noise by 70db, it affects all components, and is typically reduced well by balanced drive, but not as much as the good isolation transformers.
Digital components generate inductance across their power cables due to the variance in power draw, this is alleviated by quadrapole(star quad) power cabling which has a very low inductance.
So...
Line 1: second topaz with switch and server
Line 2: topaz>p12> dac and speaker
amps
jensen isomax in front of each subwoofer input