Quote:
Quote:
Already posted a while ago:
Quote:
Again, the output impedance is supposed to be this high on a DAC. The general rule is the input impedance of the amp should be minimum 10x higher, 2.5k ohm in this case. ODAC output impedance is around 500ohm and the recommended input impedance of 5k ohm.
Anyone know what the output impedance is on these?
Oh, and ClieOS, could you post the measurements you did?
Quote:
you are talking about the dac output ? 10 ohms j think
Already posted a while ago:
Quote:
I won't recommend it. UD100 has plenty of voltage, but it isn't designed to supply a lot of current. Also, with roughly 250ohm of output impedance, you will never get enough dampening. Plus, colouration will likely be a big issue as well.
Again, the output impedance is supposed to be this high on a DAC. The general rule is the input impedance of the amp should be minimum 10x higher, 2.5k ohm in this case. ODAC output impedance is around 500ohm and the recommended input impedance of 5k ohm.