Olimoronio
500+ Head-Fier
- Joined
- Oct 7, 2009
- Posts
- 896
- Likes
- 15
Quote:
^I think your pictures died
It was Photobucket. They're back! *refresh*
^I think your pictures died
Vinyl damping sheets...
Cork and soft closed-cell foam used in the electronics industry for sound proofing (the pink ribbon was a gag for some know-it-all who said the JVC HA-RX700's were closed lol)
JVC HA-D700 (my favorite vintage phone) taped up and sprayed with Quiet Kote...
Audio-Technica metal frame sprayed with VB...
I later learned that this was a mistake... at least the way I did it. VB Quiet Kote in the can repels from metal so you need to prime it first.
picture number 2 looks like a piñata
pure pressure!
the original driver was slightly smaller so this one barely fits in the housing. and the back of the housing is ... a hole, is like a ring with wings in the sides, in which the screws go in.
The less volume in the cup the better IMO but you also want to have pads with small holes. I've also found that it's better to have a cup that's wide and shallow than a cup that's narrow and deep.
The last thing I'm trying with Orthos is two drivers per cup. One directed towards and one directed away for bass only.
Quote:pure pressure!
the original driver was slightly smaller so this one barely fits in the housing. and the back of the housing is ... a hole, is like a ring with wings in the sides, in which the screws go in.
That's bad. There's still resonance, and I have severe doubts for your headphones...just saying. They look to be much less than ideal.
Quote:The less volume in the cup the better IMO but you also want to have pads with small holes. I've also found that it's better to have a cup that's wide and shallow than a cup that's narrow and deep.
The last thing I'm trying with Orthos is two drivers per cup. One directed towards and one directed away for bass only.
Duggeh's...6 driver headphones' pictures are gone sadly.
AKG K280esque or completely different? I'd do something like that too, but I don't know enough to make a crossover.
6 drivers? 4 drivers?!!!
damn
and yes Ish, im planning to look for regular drivers for those koss shells and transplant the orthos into the Kanen 880 woddies ... also i might be using a grado headband. something good might come out. the kanen cups are wood and very little space behind the drivers.
her2ewr uoer werdsp3 h4hew uai? 23u832dswe0- wuhju 832jew 7heu aue83ws ufkUA dauhHh e-ew329(p 3ur8! wiuuehrjfnk "fjdsfie jfiuwr opoo" urhhwriun csajiuewr 23inj jkah bjiu ijaiqvn >_sae u1ojk8 p[nvku4 nu2 urjkd u3i93gfhc... 93mlkj3.
ju stthoug ht Iwou ldad dto th einco herence ofth isthr ead. justbringitbackontopiclol.