The iBasso DX50 Thread - Latest firmware: 1.9.5 - June 30, 2016
Jun 4, 2017 at 9:07 AM Post #18,496 of 18,652
I still use mine on a regular basis. If I were in the market for a new DAP, I'd probably get another iBasso, most likely the DX80. But on a budget, you can't go wrong with this one. I used to use Rockbox and Doc's Final Firmware, but the latest official firmware from iBasso is fantastic and sounds the best to me.

I also use mine on a regular basis. I don't see myself upgrading as long as my DX50 is working not to mention that I have found IEM's and earbuds that pair well with it. Never bothered with Rockbox and the like.

1. Using my DX50 (DX5X) every day. Built like a rock and looks like new using silicone case from day 1.
2. No, I actually want to buy another used DX50 and HW&FW mod that one too.
3. Rockbax makes difference but depends on which FW version is compared and I`d rather go with Doc`s FWs or Dmitry`s Sound Unlocked FW. But last DX50 FW is also very good.

Thank you for the replies! Right now I am between the dx50, megamini, and the cayin n3.
 
Jun 4, 2017 at 5:59 PM Post #18,497 of 18,652
1. Using my DX50 (DX5X) every day. Built like a rock and looks like new using silicone case from day 1.
2. No, I actually want to buy another used DX50 and HW&FW mod that one too.
3. Rockbax makes difference but depends on which FW version is compared and I`d rather go with Doc`s FWs or Dmitry`s Sound Unlocked FW. But last DX50 FW is also very good.
HW&FW? Hardware and firmware modding? What kind of hardware modding can you do?
 
Jun 6, 2017 at 10:35 PM Post #18,499 of 18,652
Well I bought my first non-iPod dap and it is the iBasso Dx50. I look forward to a better listening experience.
 
Jun 7, 2017 at 6:24 PM Post #18,500 of 18,652
Jun 7, 2017 at 6:26 PM Post #18,501 of 18,652
Hardware mods thread: https://www.head-fi.org/f/threads/ibasso-dx50-mods.720776/page-20#post-12652071
By FW mod I meant FW by third party like SU 1.3.3. IfYou need it, ask from here, someone will send You link or share it.
As I have seen you tell people, I did some of my own research, and did find that thread. It helped me decide on the dx50 as my first dap. I plan to mod it after a bit. I also found some links for old firmwares in this thread, but not the su 1.3.3 one. I just got it and updated to 1.9.5 from ibasso. I will start my journey there. Thank you for the help!
 
Jun 9, 2017 at 12:11 AM Post #18,502 of 18,652
Could someone send me the link for the sound unlocked 1.3.3 firmware? I would like to try it next.
 
Jun 10, 2017 at 8:22 AM Post #18,503 of 18,652
Could someone send me the link for the sound unlocked 1.3.3 firmware? I would like to try it next.
I think Dmitry's GitHub page with his firmware is no longer there... here's a couple of links to my archived copies of his SU FW, versions 1.3.3 and 1.4.0 (don't ask what difference was there... I really don't remember :) ), that I uploaded to my dropbox :

https://www.dropbox.com/s/07iezp1kt4shmjd/dx50_sound_unlocked_1.3.3.7z?dl=0

https://www.dropbox.com/s/nu1p90euqpa4trx/dx50_sound_unlocked_1.4.0.7z?dl=0

Hope that helps :)
 
Jun 10, 2017 at 11:22 PM Post #18,504 of 18,652
I think Dmitry's GitHub page with his firmware is no longer there... here's a couple of links to my archived copies of his SU FW, versions 1.3.3 and 1.4.0 (don't ask what difference was there... I really don't remember :) ), that I uploaded to my dropbox :

https://www.dropbox.com/s/07iezp1kt4shmjd/dx50_sound_unlocked_1.3.3.7z?dl=0

https://www.dropbox.com/s/nu1p90euqpa4trx/dx50_sound_unlocked_1.4.0.7z?dl=0

Hope that helps :)
Thank you! I look forward to trying them out! I had found the link to his github, but I believe you are right and it is no more.
 
Jun 21, 2017 at 7:47 AM Post #18,505 of 18,652
ibasso DX50 EQ issue with 96 khz (or higher)

There is a problem through all firmwares with the equalized sound, when you play songs with 88.2 khz, 96 khz or 192 khz. All songs with 44.1 and 48 khz sound fine with EQ. But when you play 96 khz-music (as an expample for Hi-Res music), it sounds dull and disorted (test with two dx50-players ;firmware 1.5.0, 1.9.3, 1.9.4 and 1.9.5) when EQ is activated (it doesn't matter, if you use a preset or an individual setting with 10 band).
The same songs in lower resolution (downsampled before on computer to 48 or 44.1 khz) sound brilliant, open and clear. I hoped, that the last firmware-version (1.9.5) solves the problem. But it doesn't.
The issue with dull and disorted sound gets worse, the more the sampling-frequency rises (worst at 192 khz).
I also tested with two different headphones. Can someone confirm?
When i switch off the EQ, the problem is gone. All versions of example-songs (44.1, 48, 96, 192 khz) sound quite identical.
 
Jun 21, 2017 at 7:50 AM Post #18,506 of 18,652
I think Dmitry's GitHub page with his firmware is no longer there... here's a couple of links to my archived copies of his SU FW, versions 1.3.3 and 1.4.0 (don't ask what difference was there... I really don't remember :) ), that I uploaded to my dropbox :

https://www.dropbox.com/s/07iezp1kt4shmjd/dx50_sound_unlocked_1.3.3.7z?dl=0

https://www.dropbox.com/s/nu1p90euqpa4trx/dx50_sound_unlocked_1.4.0.7z?dl=0

Hope that helps :)

What does the sound-unlocked-FW do? Sorry, if the answer was 3 pages before :wink:
 
Jun 28, 2017 at 12:16 AM Post #18,507 of 18,652
Just got this dap, should I update it to the latest official fw? I'm currently running 1.9.5.

EDIT: Welp, just noticed I'm already running the latest version. Is there a better firmware to run on this dap? I'm a fan of mids.
 
Last edited:
Jun 28, 2017 at 3:27 AM Post #18,508 of 18,652
Just got this dap, should I update it to the latest official fw? I'm currently running 1.9.5.

EDIT: Welp, just noticed I'm already running the latest version. Is there a better firmware to run on this dap? I'm a fan of mids.

You can use rockbox for dx50. But it does not play hires-music. It downsamples everything to 16/44.1 or 16/48 before the DAC is feeded.
To my eyes, 1.9.5 ibasso FW is the best so far. I wish a fix to the bug with high sampling rates like 96 khz.
 
Jun 28, 2017 at 4:33 AM Post #18,509 of 18,652
Thanks, guess I'll be sticking with the 1.9.5 fw. Also what's the best gain setting if I love the vocals to pop-up more. I'm mostly listening to anisongs.
 
Jun 28, 2017 at 2:16 PM Post #18,510 of 18,652
Thanks, guess I'll be sticking with the 1.9.5 fw. Also what's the best gain setting if I love the vocals to pop-up more. I'm mostly listening to anisongs.
Everyone has a preference but I like the high gain setting on the DX50.
 
iBasso Stay updated on iBasso at their sponsor profile on Head-Fi.
 
http://www.ibasso.com/ paul@ibasso.com

Users who are viewing this thread

Back
Top