MrWalkman
Headphoneus Supremus
Hi guys, are there any ways to install purchase apps (like UAPP, Neutron) on Chinese FW ?
Not exactly, at least UAPP depends on the Play Store to verify the purchase.
Hi guys, are there any ways to install purchase apps (like UAPP, Neutron) on Chinese FW ?
That’s sad, thank you for replying Y_YNot exactly, at least UAPP depends on the Play Store to verify the purchase.
Hi guys, are there any ways to install purchase apps (like UAPP, Neutron) on Chinese FW ?
tidal announced already that they bypass. so using the native tidal app should be fine.It's a good thing that UAPP supports both Tidal and Qobuz, aka you can connect to these services and play songs directly from UAPP
tidal announced already that they bypass. so using the native tidal app should be fine.
tidal announced already that they bypass. so using the native tidal app should be fine.
I checked the logcat using the latest version of Tidal and for the ZX500, it is still not bypassing the SRC to either 48 or 192 KHz (using blue mode). UAPP continues to work without SRC (red mode and bit-perfect).
Tidal does work better today on many DAPs, just not for Sony.
good to now.I checked the logcat using the latest version of Tidal and for the ZX500, it is still not bypassing the SRC to either 48 or 192 KHz (using blue mode). UAPP continues to work without SRC (red mode and bit-perfect).
Tidal does work better today on many DAPs, just not for Sony.
i will write tidal support in terms of the sony devices.Maybe it bypasses it on certain devices, depending on how the backend audio is configured - or maybe it bypasses it only for USB DACs.
good to now.
i will write tidal support in terms of the sony devices.
i have also the fiio m17 and the led colors on the top as well as on the sides matches with the bitrate. i can say that the native tidal app works great with the m17.
About your first question, there possible but why?So if I read right, i can feed an amp with the 3.5mm headphone jack at full volume high gain, then use the volume on the amp for listening? It won't blow the amp at all? Is it possible to line out via USB c? If these options work, then the 507 is basically just a DAC?
It depends on the amp. The balanced output is 200mW@16Ω, that should be no issue for most amps, but not sure.So not a good idea to run balanced into the amp?