GRUMPYOLDGUY
1000+ Head-Fier
- Joined
- Aug 19, 2016
- Posts
- 1,146
- Likes
- 341
No fun if you take the shortcutSo based on these settings the curve should look like this? I took the settings as close as possible. The ZX507 only allows increments of 0.5.
Fixed Band EQs
In case of using fixed band (also called graphic) equalizer, apply preamp of -5.1dB (if available) and set gains manually with these parameters.
Type Fc Q Gain Peaking 31 Hz 1.41 -1.2 dB Peaking 62 Hz 1.41 -2.9 dB Peaking 125 Hz 1.41 -3.6 dB Peaking 250 Hz 1.41 -3.7 dB Peaking 500 Hz 1.41 -0.8 dB Peaking 1000 Hz 1.41 -0.1 dB Peaking 2000 Hz 1.41 1.8 dB Peaking 4000 Hz 1.41 2.7 dB Peaking 8000 Hz 1.41 4.9 dB Peaking 16000 Hz 1.41 -7.9 dB
Yes, without actually checking I'd assume it's correct.
The output of the device itself is flat across the audible bandwidth, so all you are trying to do here is adjust the frequency response of the IEMs to match the Harman curve. There will be unit to unit variation due to manufacturing tolerances, etc... but of course these variations will be imperceptible.
Last edited: