[gerelmx1986]

I dont know where are your stuff stored in a hospital. For example.my bag with my IER-Z1R and wm1A? And how do you get your stuff back in your recovery room?

Better leave them at home
Got a retinal detachment

 

[iron2k]

https://www.amazon.co.uk/gp/aw/d/B00Q8UOBR4/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1

http://mobile--shop2.dignis.cafe24.com/product/arca-earphone-case/172/

Thanks a lot

 

[ChaseDream]

Also happened to me with the kimber cables and the regular Sony 4.4.

Happens to me on Sony kimber cables with z1R and wm1z but not issue with lionheart and k10 CIEM

I just cleaned my Kimber 4.4 mm sony cable connector, and it seems that the issue still remains. While my ALO Litz 4.4 mm cable doesn't have any problem. I think that's probably a common issue with the sony cable?

 

[flyer1]

I just cleaned my Kimber 4.4 mm sony cable connector, and it seems that the issue still remains. While my ALO Litz 4.4 mm cable doesn't have any problem. I think that's probably a common issue with the sony cable?

Never had any issues with my Sony Kimber and 1Z.

 

[kubig123]

I just cleaned my Kimber 4.4 mm sony cable connector, and it seems that the issue still remains. While my ALO Litz 4.4 mm cable doesn't have any problem. I think that's probably a common issue with the sony cable?

Did you take a look at the mmcx connectors?

 

[Holdmyown83]

So you wouldn't recommend getting the sony balanced cable? I was going to get the MUC-M12NB1 for my H3's.

I still would again but not top price.

 

[ChaseDream]

Did you take a look at the mmcx connectors?

Yea, I'm pretty sure the mmcx connectors are fine. I think it's probably because that my kimber cable is old, it's been more than 3 years.

 

[DonIsGood]

Yea, I'm pretty sure the mmcx connectors are fine. I think it's probably because that my kimber cable is old, it's been more than 3 years.

I can only speak from my own experience re Kimber cable...

I bought the Sony Kimber cable (when I was travelling Japan) to go between my 1A and Oppo PM3 but I wasn't getting any LR separation. I ended up getting a 3rd party LQi cable and the LRsseparation came through fine

Reading the recommendation on the Kimber box, it specifically says its only suitable for certain Sony headphones...

 

[auronthas]

I use Andromeda with Sony 4.4 mm balanced cable. I think you’r right, this only happens when I use the sony cable...

Happen to me on Sony Kimber Kable 4.4mm, I suspect i have a loose/defective MMCX connector, at particular rotation, it will drop out from Andromeda, luckily is not on the expensive side of Andromeda

 

[auronthas]

I just cleaned my Kimber 4.4 mm sony cable connector, and it seems that the issue still remains. While my ALO Litz 4.4 mm cable doesn't have any problem. I think that's probably a common issue with the sony cable?

No problem on my ALO Reference 8 4.4 mm too, only Kimber Kable problem.

 

[endlesswaves]

I just cleaned my Kimber 4.4 mm sony cable connector, and it seems that the issue still remains. While my ALO Litz 4.4 mm cable doesn't have any problem. I think that's probably a common issue with the sony cable?

Had that problem with my EA Thor II with Furutech 4.4mm. Now the left side is totally dead. Suspect it's the soldering on the jack.

 

[Bart147]

Wrong post

 

[Vitaly2017]

Hi does any one knows if sony plans to release a new high end dap in near future?

Any rumors around?

 

[Whitigir]

Hi does any one knows if sony plans to release a new high end dap in near future?

Any rumors around?

There wont be any higher end than DMP Z1

 

[nc8000]

Hi does any one knows if sony plans to release a new high end dap in near future?

Any rumors around?

A Z500 to replace/superceed ZX300 is coming