- Joined
- Oct 14, 2013
- Posts
- 28,349
- Likes
- 32,185
The best sound quality for the cheapest price and also great reliability ? Is the cables that you make it yourself LOL! Anyways, you can only pick 2: cheap, reliable, performances
What is inserted in the 3.5mm jack in the first picture?
Dust plug pinWhat is inserted in the 3.5mm jack in the first picture?
I am using this one for a year already with my XBA-A3.Help please...
I'm finally considering getting a balanced cable for my NW-WM1A after using the single ended socket for 6 months...
I have an Earsonics SM3 v2 which has a 3.5mm single ended termination and 2 pin connections. Also, I want to be able to use my IEM with my laptop after reterminating it to 4.4mm, so I will also need a 4.4mm female to 3.5mm male adaptor.
However, the products of popular brands such as Effect Audio, Moon Audio and Audio Sanctuary are way too expensive for me.
I have found some cheaper alternatives from various vendors. Would there be considerable difference between the products of well-known brands (above) and those of alternative vendors (below)?
And of the products below which ones seem to be the better choices?
Alternative 1
Alternative 2
Alternative 3
Alternative 4
Alternative 5
Alternative 6
Alternative 7
Alternative 8
Alternative 9
Alternative 10
Alternative 11
Alternative 12
Alternative 13
And some alternatives for 4.4mm female to 3.5mm male adaptors:
Adapter 1
Adapter 2
Adapter 3
Adapter 4
Adapter 5
I'd really appreciate if you could help me... Thanks in advance...
I am using this one for a year already with my XBA-A3.
https://www.amazon.com/4-4mm-5-pole...2313195&sr=8-43&keywords=4.4mm+balanced+cable
My logic is that I do not use cable pricier than my iem, and if my iem needs pricier cable to sound good then I need to replace it.
Guys, any one with a dissassembled wm1a pictures, or know what brand is the nand flash or internal storage used inside ?
I found only 2 pieces of info, some picture of a disassembeled wm1z which shows sk hynix e-nand used,
While the service manual has a picture that shows nand flash as toshiba, but this might be a picture from an older device.
Ye i saw pictures of wm1z, i dont remember if it was his or someone else, it used a sk hynix e-nand, found no tools for it currently,
Also wanted to be sure wm1a uses the same nand or different.
Yes, I am happy with the sound more than the stock cable. The stock it replace have 3.5 connector while those is 4.4. Here is another one I bought the same time for my IT03 which I used daily.I like your logic, though my IEMs (Earsonics SM3 v2) were 400 Euros when they were still sold on the Earsonics online shop.
So, I take it you're happy with the sound coming from those cables, is that so?
Out of curiosity Whitigir how do you find the WM1Z stacks up sonically against the DX200 with one of the better AMP cards?I did modify more than a couple Mw1Z. However, I have not seen wm1A internal to confirm to you what flash it has
I am using this one for a year already with my XBA-A3.
https://www.amazon.com/4-4mm-5-pole...2313195&sr=8-43&keywords=4.4mm+balanced+cable
My logic is that I do not use cable pricier than my iem, and if my iem needs pricier cable to sound good then I need to replace it.
There is no microphonics, but not to be use for over the ear as the wire is a little tick. I like the 2nd one I post (black one) that I use with my IT03 over the ear. Also zero microphonics.How are the microphonics on this cable?