Rem0o
500+ Head-Fier
- Joined
- Jan 10, 2013
- Posts
- 516
- Likes
- 122
Yup, just went and tested that out. It's a white fuzz noise.
Plug it into a different wall plug in a different room (different circuit) and see if it's still there.
Yup, just went and tested that out. It's a white fuzz noise.
Plug it into a different wall plug in a different room (different circuit) and see if it's still there.
The hd700 is significantly more sensitive than the hd600/650. The px100 is a portable and that was doomed from the start.
I've read a lot of this thread (and man head is starting to hurt) but I haven't seen any in depth review of the Vali with the HE-400. I have an HE-400 and HD600 as my 2 main HP's with the HE-500 coming within the next month or 2. I've seen some HD600 comments but not many HE-400 or HE-500 so anyone that has those combo's if you could give me a short review of how they sound together would be a big help.
I've read a lot of this thread (and man head is starting to hurt) but I haven't seen any in depth review of the Vali with the HE-400. I have an HE-400 and HD600 as my 2 main HP's with the HE-500 coming within the next month or 2. I've seen some HD600 comments but not many HE-400 or HE-500 so anyone that has those combo's if you could give me a short review of how they sound together would be a big help.
I liked the 400 a lot better than the 500 with the Vali. Though it was a really good pairing. Smoothed out the highs on the 400. Sounded alright with the 500, just lacked a little oomph. Same with the LCD-2, for me at least.
I got my dad a modi+vali and a pair of HE-400s for christmas. He loves it, but I feel the vali doesn't have enough power fully drive the HE-400s. Even at the highest volume the sound doesn't get loud enough in my opinion.
I got my dad a modi+vali and a pair of HE-400s for christmas. He loves it, but I feel the vali doesn't have enough power fully drive the HE-400s. Even at the highest volume the sound doesn't get loud enough in my opinion.
Microphonics have been mentioned here. I decided to put a stopwatch to my Vali and figure out just how long it rings, depending on what sets it off. With the volume knob at about 11 o'clock and using HE-300 headphones, I got the following
Switch the warmed-up amp off then back on - 57 seconds audible ringing
Plug in the headphones - 1 minute, 16 seconds
Tap the case firmly with a fingernail - 1 minute, 14 seconds
Tap the case lightly with the tip of a screwdriver - 1 minute, 7 seconds
Rub the headphone cable against itself - 21 seconds
Lean back in my chair so that the headphone cable drags across a metal box on the floor - 22 seconds
Nearly all ringing is confined to the right channel.
Are these results similar to what other people get?
Microphonics have been mentioned here. I decided to put a stopwatch to my Vali and figure out just how long it rings, depending on what sets it off. With the volume knob at about 11 o'clock and using HE-300 headphones, I got the following
Switch the warmed-up amp off then back on - 57 seconds audible ringing
Plug in the headphones - 1 minute, 16 seconds
Tap the case firmly with a fingernail - 1 minute, 14 seconds
Tap the case lightly with the tip of a screwdriver - 1 minute, 7 seconds
Rub the headphone cable against itself - 21 seconds
Lean back in my chair so that the headphone cable drags across a metal box on the floor - 22 seconds
Nearly all ringing is confined to the right channel.
Are these results similar to what other people get?