[redrol]

You can either get a damper remover and remove that thing and replace it or deal with support.

 

[MrDelicious]

damper remover

Never heard of one, what is that?

 

[redrol]

here you go
http://soundlinkhearing.com/product...ic-in-ear-monitor-accessories/?v=1c2903397d88


and as you can see your damper is probably torn

 

[MrDelicious]

here you go
http://soundlinkhearing.com/product...ic-in-ear-monitor-accessories/?v=1c2903397d88


and as you can see your damper is probably torn

Gotcha, thanks!

Is this even possible to use on the Blessing though, isn't the damper fixed to the resin?

@MOONDROP ?

 

[Cevisi]

Gotcha, thanks!

Is this even possible to use on the Blessing though, isn't the damper fixed to the resin?

@MOONDROP ?

No it is not fixed to the resin. You can buy the same damper on soundlink too. Or you get a few other dampers and play around with the tuning

 

[FastAndClean]

Gotcha, thanks!

Is this even possible to use on the Blessing though, isn't the damper fixed to the resin?

@MOONDROP ?

the damper is torn, you can see from the photo how it hangs down, it is brown color (1000ohm)

 

[MrDelicious]

Very cool, I will look into.

Thanks guys!

 

[RikudouGoku]

Seemed like there was a pretty substantive imbalance in my Blessing 2 @ 5kHz-ish so I took a closer look and sure enough the filter material in the tube was loose which I guess is the cause. Any ideas what to do about this?

My question is how that even happened. Did it arrive like that?

 

[FastAndClean]

Very cool, I will look into.

Thanks guys!

how is the sound with the torn damper? is it harsh sounding? i have some brown and white dampers and was wondering if i can make some mods, that damper is responsible for the midrange drivers

 

[MrDelicious]

My question is how that even happened. Did it arrive like that?

These are 2nd hand, no idea. I did notice the imbalance from the start but thought it was my ears at first as I had the flu then.

how is the sound with the torn damper? is it harsh sounding? i have some brown and white dampers and was wondering if i can make some mods, that damper is responsible for the midrange drivers

Not harsh no but excessive. You could approximate it by applying 5-6dB at 5kHz with Q of 1. That sounds balanced to me currently on the right side.

 

[FastAndClean]

Not harsh no but excessive. You could approximate it by applying 5-6dB at 5kHz with Q of 1. That sounds balanced to me currently on the right side.

thanks, if the stock get clogged i will change them to white dampers, they are 680ohms, will get a bit more upper mids (i am a midrange junky)

 

[assassin10000]

here you go
http://soundlinkhearing.com/product...ic-in-ear-monitor-accessories/?v=1c2903397d88


and as you can see your damper is probably torn

That tool is a tap. If you want a version that can't potentially poke through this is the one I use (below drill bit, which was my original tool on the non-cutting side):



https://m.aliexpress.com/item/32719734823.html
Sold in pairs, but you maybe able to message and request a single.

 

[redrol]

That tool is a tap. If you want a version that can't potentially poke through this is the one I use (below drill bit, which was my original tool on the non-cutting side):



https://m.aliexpress.com/item/32719734823.html
Sold in pairs, but you maybe able to message and request a single.

Thank you sir!! you can tell how much damper screwing around with I have done... not much

 

[MOONDROP]

Seemed like there was a pretty substantive imbalance in my Blessing 2 @ 5kHz-ish so I took a closer look and sure enough the filter material in the tube was loose which I guess is the cause. Any ideas what to do about this?

check with your distributor, should be covered by warranty.

 

[MOONDROP]

Any updates on the knowles drivers issue? Blessing 2 is still not being stocked, but there are some available in taobao from various sellers and the official Moondrop store too. If i were to buy blessing 2 in taobao would they still be the ones that has knowles drivers in them?

It's only an issue of driver supply, some sellers just either say pre order in description or just have some spare stock.
We were considering for a "chinese based" version of blessing 2 to solve the driver shortage since there's really a large demand(we will use a different product name, not "blessing 2",we will keep manufacture blessing 2 with knowles SWFK as promised)
We are not sure whether to continue that "chinese based blessing 2" project at this moment.