n_maher
Resistorous Conflagorous
- Joined
- Nov 20, 2004
- Posts
- 8,411
- Likes
- 35
Yes, your STEPS set up to output 27V will work just fine for the Millett and the M³. I've run the exact setup (well 26.5V) on both and neither has suffered one bit. Somewhere in this thread AMB describes the voltage drops that you get during the circuit of the M3 so that 27V is actually safe for the 8610s since they see at least 1V less at the chip.
HTH,
Nate
HTH,
Nate