migasson
100+ Head-Fier
- Joined
- Dec 11, 2012
- Posts
- 432
- Likes
- 61
Not yet, but you can send me your LCD-X and I'll try
No, bugger off!!!!!
Not yet, but you can send me your LCD-X and I'll try
Hi Androb, if you are going to buy a Pro-ject Turntable then look around and ask questions...MAKE SURE YOU GET THE 16 VOLT AC MOTOR...... I got a Debut Carbon from the USA, and it has the 16 Volt AC motor which can be supplied from the Speedbox S,($120 US, 89 GBP) which supplies 16 Volt AC with a stability of 0.001%. The standard model Esprit Turntable will have a 15 Volt DC or an 18 Volt DC motor,and the Speedbox S will not work with that. The Speedbox S will work with any turntable with a 16 Volt AC motor.
You might want to order a turntable from USA and buy a Speedbox S locally so that it works with your local power supply (I am not sure what voltage etc is supplied in Sweden)
Technical specifications Pro-Ject Debut Carbon Esprit (DC) Speed 33, 45 (manual speed change) Drive principle belt drive Platter 300mm acrylic platter Mains bearing stainless steel Wow & flutter +/- 0,10% Speed drift +/- 0,80%
Technische Daten Pro-Ject Speed Box S INPUT 18V DC OUTPUT 16 V AC / 190mA (up to 3W max) SPEED STABILITY +/- 0,001%
The Speedbox S has speed stability 800 times better than the standard Esprit or Carbon.
Lcd-3 works fine so I guess it will work nicely aswellHas anyone used a Little Dot MK VI+ with the LCD-X yet?
I was leaning towards Audyn True Copper 0.33µF, but they are hard to find in stock. I finally bought 0.68 ones, probably overkill but the "bass early cutoff" is now gone. I've also swapped all 8 330 Ohm resistor for Kiwame carbon film.
I was leaning towards Audyn True Copper 0.33µF, but they are hard to find in stock. I finally bought 0.68 ones, probably overkill but the "bass early cutoff" is now gone. I've also swapped all 8 330 Ohm resistor for Kiwame carbon film.
I'll let the capacitor burn a few hours before reporting.
With my 1.0uf suggestion you'd get a bit more bass.
This?
http://www.parts-express.com/audyn-true-copper-cap-033uf-630v-copper-foil-capacitor--027-152
This afternoon I've replaced the 4 coupling caps and the 8 5W resistor.
It was painful, but it's amazing right at first start.
More details with ugly photos and a little report after some burn in.