You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Home-Made IEMs
- Thread starter Bilavideo
- Start date
I have 26-E25WT02/9, do you want to buy it?
I have 26-E25WT02/9 and trying to build.
Last edited:
I think the person was asking about the E25ST001/D, E25ST002/D, and/or the E50DT0005/D.
dhruvmeena96
Headphoneus Supremus
I think the person was asking about the E25ST001/D, E25ST002/D, and/or the E50DT0005/D.
Only the tweeter part
Otherwise he might have to disassemble the driver
Yeah, thanks but looking for just the tweeter. And I live in the US so depending on price, it may not make sense to try to ship to me. Really they just look a little better than a 30095 so I was interested, but I have some 30095's ill try out first.
I looked up the datasheet and those seem like a good full range solution by themselves, maybe you just try to make a small earbud style, use foam or mesh filter on the nozzle if needed.
I looked up the datasheet and those seem like a good full range solution by themselves, maybe you just try to make a small earbud style, use foam or mesh filter on the nozzle if needed.
Hi all, after take impression out of silicone mold, the paraffin which I use to coat on impression is broken and stuck inside mold. Any one are same issue and how to solve it?
Blow it out with compressed air, carefully pick it out with tweezers.
justsomesonyfan
Headphoneus Supremus
- Joined
- Sep 24, 2013
- Posts
- 1,573
- Likes
- 1,892
@dhruvmeena96 i'm getting a pair of these soon, traded for them, altho they can be purchased for around 1.3k euro iirc.Hello team
does anyone tried made some diy ATM earphones?
like "Project Heaven" on AMT driver (Air Motion Transformer technology)?
edit - the hybrid ones, dd/amt black/gold pair.
Last edited:
BigBublik
New Head-Fier
I want to make hybrid CIEM.
I like sound in my GK-31732 but i have more bass and more textured bass. I think use TWFK for tweeter and dynamic driver for woofer.
And i have some questions:
1. Crossover. Which i need to use?
2. Driver. I want to buy Sony MH755 or MH750 and extract dynamic driver. Or are there better options?
I like sound in my GK-31732 but i have more bass and more textured bass. I think use TWFK for tweeter and dynamic driver for woofer.
And i have some questions:
1. Crossover. Which i need to use?
2. Driver. I want to buy Sony MH755 or MH750 and extract dynamic driver. Or are there better options?
General question, which do you finalize first? Assuming you're happy with circuit design and preliminary frequency response measurements.
Do you finalize physical stuff like attaching and gluing tubing, dampers, verify fit in shell.
Or do you do all the wiring first? And risk having to rework or damaging something as you try to get it packed in a shell after it is wired?
Do you finalize physical stuff like attaching and gluing tubing, dampers, verify fit in shell.
Or do you do all the wiring first? And risk having to rework or damaging something as you try to get it packed in a shell after it is wired?
dhruvmeena96
Headphoneus Supremus
too expensive for my poor heart@dhruvmeena96 i'm getting a pair of these soon, traded for them, altho they can be purchased for around 1.3k euro iirc.
edit - the hybrid ones, dd/amt black/gold pair.
but still thumbs up
mattmatt
100+ Head-Fier
- Joined
- Feb 11, 2012
- Posts
- 456
- Likes
- 282
I attach my tubing first so there's less stress on the solder tabs when handling them.General question, which do you finalize first? Assuming you're happy with circuit design and preliminary frequency response measurements.
Do you finalize physical stuff like attaching and gluing tubing, dampers, verify fit in shell.
Or do you do all the wiring first? And risk having to rework or damaging something as you try to get it packed in a shell after it is wired?
I now also do "wiring harness" 2nd. From the socket to the crossover components then solder it to the drivers with the tubes.
Last edited:
dhruvmeena96
Headphoneus Supremus
it affects impedance so noJh audio and some other companies they talking in the internet about phase acoustic cancellation and big dips in the frequency response.
To be honest I would love to make my iem with a phase issue and a big dip at 200 hz.
One question guys , the resistor in a passive crossover, can I use any value I want ?
I'm very confused with this .