Did built some new pads for my bass heavy K1000. For me it looks good and is more comfortable.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
History of the AKG K1000?
Did built some new pads for my bass heavy K1000. For me it looks good and is more comfortable.
Nicely done! I need to replace my pads as well. What material did you use?
I belief the english word is sponge rubber 10mm. You can try different thickness and stiffness.
Sandro Sena
100+ Head-Fier
ok, I give up...
could someone please recommend me a technically perfect substitute material ("same" acoustic properties) for the virtually unobtainable 80ppi reticulated polyurethane foam with open cellular structure?
Not without fear, I decided to disassemble one of my very low serial number K1000 BH units (both have the well-known rattle problem) and the foam was completely degraded, I just touched it with tweezers and the place where it was touched magically turned to dust. I removed what was left and the membrane cavity was really " seasoned" with polyurethane powder. I cleaned it thoroughly and it is ready to receive the new material.
could someone please recommend me a technically perfect substitute material ("same" acoustic properties) for the virtually unobtainable 80ppi reticulated polyurethane foam with open cellular structure?
Not without fear, I decided to disassemble one of my very low serial number K1000 BH units (both have the well-known rattle problem) and the foam was completely degraded, I just touched it with tweezers and the place where it was touched magically turned to dust. I removed what was left and the membrane cavity was really " seasoned" with polyurethane powder. I cleaned it thoroughly and it is ready to receive the new material.
Last edited:
plakat
Headphoneus Supremus
Maybe @hrklg01 can help out with a pointer to replacement foam?ok, I give up...
could someone please recommend me a technically perfect substitute material ("same" acoustic properties) for the virtually unobtainable 80ppi reticulated polyurethane foam with open cellular structure?
Not without fear, I decided to disassemble one of my very low serial number K1000 BH units (both have the well-known rattle problem) and the foam was completely degraded, I just touched it with tweezers and the place where it was touched magically turned to dust. I removed what was left and the membrane cavity was really " seasoned" with polyurethane powder. I cleaned it thoroughly and it is ready to receive the new material.
hrklg01
Member of the Trade: Mysphere
AKG K1000 developer
Gut geeignet ist auch ein standardmäßiger, vollständig offener PU-Schaum mit 80 Poren pro Zoll und einer Dicke von 10 mm.
Any translation to English possible, it should be helpful info above.Gut geeignet ist auch ein standardmäßiger, vollständig offener PU-Schaum mit 80 Poren pro Zoll und einer Dicke von 10 mm.
Danke
Any translation to English possible, it should be helpful info above.
Danke
A standard, fully open PU foam with 80 pores per inch and a thickness of 10 mm is also well suited.
Thank you much.A standard, fully open PU foam with 80 pores per inch and a thickness of 10 mm is also well suited.
Sandro Sena
100+ Head-Fier
Thank you, Herr Renner and other members who tried to help,Gut geeignet ist auch ein standardmäßiger, vollständig offener PU-Schaum mit 80 Poren pro Zoll und einer Dicke von 10 mm.
but...
"standardmäßiger", "standard", means not reticulated? The whole difficulty is in obtaining 80ppi foam, reticulated or not.
It is actually not difficult to find. The difficulty is to find it in small quantities....
Here is a source.
The example is slightly thicker than 10mm, but usable. You just need a lot of friends with K1000's to share.
Here is a source.
The example is slightly thicker than 10mm, but usable. You just need a lot of friends with K1000's to share.
ShaolinGrump
100+ Head-Fier
I’ll buy a K1000 rehab sized worth. Or even a double portion. If there is a group buy, count me in and send PM.
Last edited:
Sandro Sena
100+ Head-Fier
Thank you,Here is a source
I contacted them the day before yesterday, but they told me they don't ship to other countries.
I would buy that amount of material with no problem if they shipped to Brazil, and I would experiment with my Stax Sigma units, replacing that wool just for the pleasure of experimenting, but it wasn't possible. I'm still looking for
Last edited:
I’ll buy a K1000 rehab sized worth. Or even a double portion. If there is a group buy, count me in and send PM.
In the past I have tried to source different items where only large quantities were available. A group buy, as you mentioned is certainly one possibility. Another would be to see if a supplier has scraps or samples available. As the K1000 application does not require much, it's worth a try.
I'll see what I come up with and post my result(s). I have two sets of K1000's of my own to maintain.
What do you mean it is difficult to buy it? It is even available on Ebay and can be shipped to Brazil. Just search "80 ppi foam", and cut a peace of the size you want yourself."standardmäßiger", "standard", means not reticulated? The whole difficulty is in obtaining 80ppi foam, reticulated or not.
You can also use felt instead of the foam.
Users who are viewing this thread
Total: 4 (members: 0, guests: 4)