https://store.hiby.com/blogs/news/some-information-before-the-release-of-hiby-r3-ii
I may consider for my backpack, want 100g player
I may consider for my backpack, want 100g player
...still $200 as wellhttps://store.hiby.com/blogs/news/some-information-before-the-release-of-hiby-r3-ii
I may consider for my backpack, want 100g player
Try holding down the power button, AND the volume down button for 10 to 15 seconds...Hi all, need some help/ideas. My R3 Pro Saber will not power up/switch on! Charged it with my normal USB-C charger and no light comes up on the side of the unit. Very confused!?
Hey, thank you so much! The low power charger worked!! Very happy You are a star.Try holding down the power button, AND the volume down button for 10 to 15 seconds...
- If that does not work, try charging with a low power USB charges, one rated 500ma or less... Like original USB 1 ports. from an old laptop... If battery is "too" dead, sometimes they won't accept or evet start charging from higher power sources...
2 ideas to try...
Is that a Fiio cable?I have just joined the R3 Pro Saber 2022 club for some very specific reasons :
-> the 100g (with an extra cash clip sticked to it for hanging) is not an big issue to replace my FIIO BTR7, UP4(2022) or iFi Go blu to be able to sleep an whole night with it hanging on my T Shirt collar.
-> the battery playing time seems to be comparable to the iFi Go Blu (10 to 11hours in BT LDAC/990kbps receiver mode) which is far better than the two other BT receivers (between 5 to 6 hours max).
-> the combo with the Sennheiser IE600 (most comfortable IEM for sleeping on the side) offers a convincing sound quality, without any permanent background hiss at low volume level like the iFi Go Blu has.
Unfortunately, I was expecting with Qobuz, I would be able to use offline my playlists for long intercontinental planes.. but the R3 Pro Saber has a very limited version of Qobuz player with no offline playlists management on SD.
Basically, I have one question concerning the double ES9219 DAC, as it's not clear if the second DAC is activated
-> only for MQA16x decoding ?
-> only with if hi gain is activated ?
Maybe it's just a placebo effect, as it's not easy to do a direct A/B comparison, but I feel sound quality is significantly improved at same volume pressure, when Hi Gain is activated (at least with better/deeper, maybe more textured lower frequencies) => is this possible ? with the Shanling UP4 2022 the second DAC is clearly only activated with setting high gain and sound impacts is similar on lower frequencies..
Any ideas on this point ?
Is that a Fiio cable?
How did you get it to fit the IE600?
When I tried my FH3 cable with the IE600 it didn't fit. Looks like you've removed the red and blue bits though so maybe that answers my question.
I wonder if there is an emulator for the R2ii as well... I got it a few days ago and had a ton of fun editing and changing some of the icons, but it's too cumbersome and unnecessary wear on the chip to change one thing and flash the .upt, change again, flash again. Also, if there is not a pre-made emulator, is it possible to modify the R3 emulator to match the R2ii?https://www.dropbox.com/s/u9jwfvb1bwhhn19/R3 Theme Tool.zip?dl=0 I use this theme editor over the one hiby provides as I have never gotten theirs to work.