WayTooCrazy
Headphoneus Supremus
@mmlogic, nice music but I'm listening on my old Stax SRD-34 since I'm out on my lanai enjoying some pizza and wine.
I thought pizza goes with beer.
@mmlogic, nice music but I'm listening on my old Stax SRD-34 since I'm out on my lanai enjoying some pizza and wine.
These headphones are so sensitive!
I have like no room to play with the volume control! (Vali 2)
Is there something I can put between my DAC and amp to lower the volume being output by the DAC so that I have more room to play with the volume on the amp?
Right now it's being fed by my Modi multibit which outputs 2v, if I could lower that to ~1v that would seriously help...
Any ideas?
Are you using the Vali on the lower output gain?
And yes, Schiit makes a box called the SYS which will give you some more volume control. Put the SYS between the Vali and your source, and you can lower the output without any loss of fidelity.
Yes, I'm on low gain.
Great idea! I guess I'll order a SYS.
Thanks!
After several thoughts on my poor skillz in woodwork I decided to go to my friends in Kennerton for an advice and help.
Here are the cups treated with Tikkurila anticeptic and finally sanded with 1000 - 2000 - 2400 sandpaper
Then Carnauba wax was applied (to take care of the cups and preserve the wood)
Finally the cups were powered by Kennerton Team from the inside
Here is the wood video:
https://youtu.be/qczGRCoqYJg
Uh did he finish the inside of the cups? You're gunna get more brightness due to the reflectivity..
Is it the hazy in person? The images make the finish look hazy.
After several thoughts on my poor skillz in woodwork I decided to go to my friends in Kennerton for an advice and help.
Here are the cups treated with Tikkurila anticeptic and finally sanded with 1000 - 2000 - 2400 sandpaper
Then Carnauba wax was applied (to take care of the cups and preserve the wood)
Finally the cups were powered by Kennerton Team from the inside
Here is the wood video:
https://youtu.be/qczGRCoqYJg
After quite a while of listening to the TH-X00 (mahogany) . I realized my preference lean towards a warm sound signature. The TH-X00 gives THE perfect bass for my taste but there is just a bit too much treble for me. Overall it is a great headphone. Great for EDM. Sometimes EQ a little to reduce the treble.
After several thoughts on my poor skillz in woodwork I decided to go to my friends in Kennerton for an advice and help.
Here are the cups treated with Tikkurila anticeptic and finally sanded with 1000 - 2000 - 2400 sandpaper
Why were they treated with an antiseptic?
Why were they treated with an antiseptic?