Good to hear that things went smoothly. Hopefully that's them set for many years of trouble free service.
Applying threadlock was definitely worthwhile as the screws do have a tendency to slowly work themselves out over time which if left unchecked will likely result in the gimbal failing. Good luck finding that little spring and screw again when it does....(shag pile rug owners need not apply).
Reworking and modding of the charity shop bargain 900mk2 finished. Took a bit of Lawton mods and a bit of whitigir mods and added a touch of my own. Added in the ori pads / dekoni attenuation rings and pilot pad and a custom made 4.4mm balanced copper cable with matching paracord sleeve.
Had the cups touched up by a friend who is a French polisher and has worked with arushi before, done a really good job on the cups look like new.
After lots of experimenting, the TH900 MKII is the only headphone I enjoy enough to leave it in its stock form. No EQ, pad swaps or anything else. My current line-up is the TH900, HD800S, LCD-X, Verite C and Arya Stealth (several other mid range as well). The Fostex is the only 1 that I do not EQ. Tried several pads out of curiosity but always end up back with the stock pads.
Using with the iFi Pro stack. The only change I'll make sometimes is 1-2 clicks on XBass if i want my brain to rattle.
After lots of experimenting, the TH900 MKII is the only headphone I enjoy enough to leave it in its stock form. No EQ, pad swaps or anything else. My current line-up is the TH900, HD800S, LCD-X, Verite C and Arya Stealth (several other mid range as well). The Fostex is the only 1 that I do not EQ. Tried several pads out of curiosity but always end up back with the stock pads.
Using with the iFi Pro stack. The only change I'll make sometimes is 1-2 clicks on XBass if i want my brain to rattle.
hello, may I get some recommendations for a suitable headband cover please? my original headband shows visible signs of the leather "cracking" and it won't be long before it starts flaking I believe. I'm looking for something that covers the entire headband, thank you.
hello, may I get some recommendations for a suitable headband cover please? my original headband shows visible signs of the leather "cracking" and it won't be long before it starts flaking I believe. I'm looking for something that covers the entire headband, thank you.
After lots of experimenting, the TH900 MKII is the only headphone I enjoy enough to leave it in its stock form. No EQ, pad swaps or anything else. My current line-up is the TH900, HD800S, LCD-X, Verite C and Arya Stealth (several other mid range as well). The Fostex is the only 1 that I do not EQ. Tried several pads out of curiosity but always end up back with the stock pads.
Using with the iFi Pro stack. The only change I'll make sometimes is 1-2 clicks on XBass if i want my brain to rattle.
Mods and tweaks are not for everyone, I'd love to just buy a pair and listen as stock especially when you spend serious amounts of money. Alas for me with age comes issues of treble sensitivity and pressure in the ears, sold all my iems and now just using speakers and closed / open backs. I'm no longer a critical listener just a fun one. A slight adjustment to the treble peaks and pad comfort is all require these days. If your getting the best sound out of yours in stock formation it just goes to show how much of a good match they are for you and a definite keeper as well
hello, may I get some recommendations for a suitable headband cover please? my original headband shows visible signs of the leather "cracking" and it won't be long before it starts flaking I believe. I'm looking for something that covers the entire headband, thank you.
While you were replacing that, would you also go ahead and replace the screws in the 'problem area' in the R/L housing? The headband and blocks are the few places I have not taken apart/modded one yet.
While you were replacing that, would you also go ahead and replace the screws in the 'problem area' in the R/L housing? The headband and blocks are the few places I have not taken apart/modded one yet.
Was originally going to keep the 610's I bought as spare parts but after a listen I quite like them so I might have a tweak of the drivers / cups, still thinking of getting some purple heart cups for the 900's and maybe a set for the 610's but while I decide I thought why not do something with the cups from the 610 as they are a bit bland. So sanded odd areas of the cups and stained in a marble effect with some unicorn stainer and spray acrylic laquerd to give them a shine and a bit more protection. Pictures don't really do them justice but I've got a quite nice marble effect on them, just left at work over the weekend to harden and will fit next week.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.