E11, a new start of FiiO's portable amp ( added some real photo )

Dec 13, 2010 at 1:20 AM Post #62 of 1,326
oh noo..thanks for pointing that out. I was just reeeaally wishing for something the size of a T3. 
bigsmile_face.gif

 
Quote:
They're almost the same size.



 
Dec 13, 2010 at 1:30 AM Post #63 of 1,326
I hope it does pair well with the Fuze, as I just bought a pair of ESW9s...
 
Dec 13, 2010 at 1:31 AM Post #64 of 1,326
I hope it does pair well with the Fuze, as I just bought a pair of ESW9s...
 
Dec 13, 2010 at 1:44 AM Post #65 of 1,326
This is going to be so awesome if the sound is better that the E5s and E7s which sound alike. Hopefully, it would provide better midrange smoothness and treble detail which i find lacking in fiio products. however, i would definitely buy it since i enjoyed the E7 better than my RSA predator when i had them both, with my M50s.
 
Dec 13, 2010 at 1:49 AM Post #66 of 1,326
The E7 is listed to support up to 300 ohms but as we know it doesn't come close to doing such headphones proper justice fro man amplification standpoint. My guess is that the E11 is going to give us exactly that; like Jack said, basically a portable E9. Small amp; but extremely powerful.
 
Dec 13, 2010 at 2:05 AM Post #67 of 1,326


Quote:
This is going to be so awesome if the sound is better that the E5s and E7s which sound alike. Hopefully, it would provide better midrange smoothness and treble detail which i find lacking in fiio products. however, i would definitely buy it since i enjoyed the E7 better than my RSA predator when i had them both, with my M50s.



Woow, you have a very good amp already!  E5, E7 both used the same TPA6130 as amp, but the SQ is a little different because E5 use OPA2338, E7 use AD8692 as pre amp!
 
But E11 will use AD8397 as amp OP! and the power supply is different, volume control change to ALPS potentionmeter!
 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com support@fiio.com
Dec 13, 2010 at 3:13 AM Post #69 of 1,326
I think I should put some photos on here!   the size is little than E7, the battery is 750mAh, but E11 need more power than E7 to get the best SQ! like class A vs class AB!
 
but don't think it is a magic to change your setup to a Hi-end device! a good amp just can help you get the full performance from your DAP and headphone/earphone!
 
The ETA is March, 2011, because soon we will have a long long holiday just as your Christmas Holidy! all worker will stop working from 15th Jan to 20th Feb!
 

 
 
 
 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com support@fiio.com
Dec 13, 2010 at 3:54 AM Post #70 of 1,326
if i understand, you put volume pot on its side to lower amps depth - very innovative, same as with nokia battery 
smily_headphones1.gif
 . nice to see creative people working in fiio, especially compared to those old school guys from fihiman.
 
Dec 13, 2010 at 4:21 AM Post #72 of 1,326


Quote:
if i understand, you put volume pot on its side to lower amps depth - very innovative, same as with nokia battery 
smily_headphones1.gif
 . nice to see creative people working in fiio, especially compared to those old school guys from fihiman.



Yes, it is the only way to put a good potentionmeter into a slim case! otherwise we have not use other kind of potentionmeter, but I must said that the quality is not so good!
 
Below is the slim potentionmeter which used in some portable radio, portable DAP, CD!  hard to compare with the normal potentionmeter if all made by the same company! 
 

 
 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com support@fiio.com
Dec 13, 2010 at 5:19 AM Post #73 of 1,326
As excited as I am for the E11 (you may as well put me down for preorder when it becomes available) I want more info on this DAP! In my mind I am imagining a cheaper, yet more powerful iPod that supports high resolution music (which this will support if I remember correctly, not that I own any music above 44/16) with FLAC support. And cheaper! Oh wait, I said that already.
 
Dec 13, 2010 at 5:28 AM Post #74 of 1,326


Quote:
Quote:


Impressions? Will it drive my HD650?



ROFL! :D Hmm, initial impressions show that due to the printer ink used and the type of special paper I had flown in from overseas, I would say my paper mock up would just barely power a potato :P
 
Also, Feiao thank you for the pictures and all this info so far.  It really looks beautiful and i think a lot of people are going to go wild over it due to its size and ability to drive things well.
 
Dec 13, 2010 at 5:43 AM Post #75 of 1,326


Quote:
Quote:
Quote:

Impressions? Will it drive my HD650?



ROFL! :D Hmm, initial impressions show that due to the printer ink used and the type of special paper I had flown in from overseas, I would say my paper mock up would just barely power a potato :P
 
Also, Feiao thank you for the pictures and all this info so far.  It really looks beautiful and i think a lot of people are going to go wild over it due to its size and ability to drive things well.


It is our pleasure to make some products to you! in fact, more like head-fi'er hire FiiO to make some products that you need!
 
BTW, it is a interesting work of you to show our E11! great!
 
FiiO Stay updated on FiiO at their sponsor profile on Head-Fi.
 
https://www.facebook.com/FiiOAUDIO https://twitter.com/FiiO_official https://www.instagram.com/fiioofficial/ https://www.fiio.com support@fiio.com

Users who are viewing this thread

Back
Top