[Bluess]

Hi guys I have a question I don't recall seeing answered in the thread. I saw it brought up but not resolved. The question is, can you use your cell phone as the source, and the dx200 as the dac/amp? So I want to fire up a song on YouTube via phone, but have the audio play through the dx200.

I know you can do this with a PC and dx200, but I am unsure if you can do this with a phone. I have only known the USB otg on phones as a receiver of devices, and not the transmitter.

Yes, it is possible on oreo, there's an option to use as Bluetooth dac

 

[newtophones07]

Hi guys I have a question I don't recall seeing answered in the thread. I saw it brought up but not resolved. The question is, can you use your cell phone as the source, and the dx200 as the dac/amp? So I want to fire up a song on YouTube via phone, but have the audio play through the dx200.

I know you can do this with a PC and dx200, but I am unsure if you can do this with a phone. I have only known the USB otg on phones as a receiver of devices, and not the transmitter.

Yes, you can, but you will need an otg cable , preferably a dual otg (so the dx200 does not charge off your phone).

 

[quisxx]

Thanks guys.

 

[DaYooper]

Who knew? After finally getting to do a proper a/b with the dx200Ti/ampT1 with stock dx200/amp1, same phones and amp and cable and recording I am truly astounded. I might just be getting to appreciate that there can be and is a whopping difference. And to be honest even the amp8 on the regular 200 doesn't sound as full and musical as the Ti.

I still can't bring myself to put the amp 8 on the Ti though. Idk, something about the look.

 

[artpiggo]

When will AMP9 be available, I am rooting for this too long.

 

[xenoVa]

When will AMP9 be available, I am rooting for this too long.

No news yet

I was about to buy DX208, then I decided to wait for DX220 and/or AMP9 . A DX229 would be super cool.

 

[cycheang]

yesterday night while I'm enjoying my DX200 and my IEM, about 20 minutes of listening, suddenly my DX200 shut off and I tried to press the power button and it cannot power up.

What I did was I connect to the power source via USB-C cable, it did power up and showed only left 1% of battery. I cannot believe why the battery suddenly drop from 70% to 1%.
Because it is very late, so I remove the cable from power source and went to bed.

Today, when I tried to charge DX200, battery percentage become 70% again.

@Paul,

Anything I can do for my unit ? I just purchased it on last year November.

 

[truenobzr]

Does anyone has any auto shutdown issue with Oreo?? I frequently has this issue...

 

[Paul - iBasso]

Does anyone has any auto shutdown issue with Oreo?? I frequently has this issue...

Have you tried a factory reset?

yesterday night while I'm enjoying my DX200 and my IEM, about 20 minutes of listening, suddenly my DX200 shut off and I tried to press the power button and it cannot power up.

What I did was I connect to the power source via USB-C cable, it did power up and showed only left 1% of battery. I cannot believe why the battery suddenly drop from 70% to 1%.
Because it is very late, so I remove the cable from power source and went to bed.

Today, when I tried to charge DX200, battery percentage become 70% again.

@Paul,

Anything I can do for my unit ? I just purchased it on last year November.

Please contact me at paul@ibasso.com and we will get this straightened out.

 

[cycheang]

Have you tried a factory reset?



Please contact me at paul@ibasso.com and we will get this straightened out.

I had dropped you an email.

 

[truenobzr]

Have you tried a factory reset?



Please contact me at paul@ibasso.com and we will get this straightened out

 

[truenobzr]

Have you tried a factory reset?



Please contact me at paul@ibasso.com and we will get this straightened out.

I did a double wipe, reinstall the firmware twice as well, the auto shutdown frequently happened, sometimes the system run 2 days without flaw.

 

[DrumSeb]

The new Oreo update doesn’t work for me... and just stop after the black screen fail. Any idea ?

 

[ngd3]

@Whitigir do you think I will have any issues if I cover most of the PWB/components with Kapton and a layer of TDK sheets? Meaning just one or 2 larger sections instead of individual components

I don't do DSD and only use it 1-2 hours at a time so I don't think heat will be a big issue

 

[Whitigir]

@Whitigir do you think I will have any issues if I cover most of the PWB/components with Kapton and a layer of TDK sheets? Meaning just one or 2 larger sections instead of individual components

I don't do DSD and only use it 1-2 hours at a time so I don't think heat will be a big issue

You will be just fine if you do Kapton tape first and then TDK sheets on top. I did that before, but you may want to observe the changes