Hi, i'm new in this hobby of DIY earbuds, but i have decided to do my first DIY high impedance earbuds. I picked these drivers: https://es.aliexpress.com/item/1005....0.0.3dab3c00Qs8FMs&mp=1&gatewayAdapt=glo2esp and these cables: https://es.aliexpress.com/item/4000....0.0.3dab3c00Qs8FMs&mp=1&gatewayAdapt=glo2esp
What do you think is a good election?
As always, very sage advice from @jeejack. His recommendation for the 150Ω Blue Glue DIY driver is indeed an excellent one... most especially for a beginner. This driver is quite easy to work with (e.g. large unobstructed soldering pads/points and of robust build it does seem to handle heat very well; though do still be careful with that soldering iron!). This driver has mad tuning potential (an array of possible signatures) to say the very least!Honestly, no! They're very hard to tune and you risk ruining them. If you want a safe high impedance driver try 150 ohm BG. But before that @WoodyLuvr has a set of essential questions.
Here is a link to the essential questions that @jeejack is referring to.
Good luck! Be patient. Try and try again. Be creative and willing to experiment. And do let us know about your progress.
Last edited: