[gr4474]

I ended up with these

https://www.amazon.com/gp/product/B077D79743/ref=ewc_pr_img_1?smid=A1ZWNP05VR80QB&psc=1

 

[Raketen]

I ended up with these

https://www.amazon.com/gp/product/B077D79743/ref=ewc_pr_img_1?smid=A1ZWNP05VR80QB&psc=1

IDK if either of these work, too late anyway I guess but FWIW:

Lunashops this one that mentions Hifiman specificallly, as well as some other "slim" options: https://www.lunashops.com/goods.php?id=7687

If you are looking for fancy bits, Oyaide make some for recessed sockets like this: https://www.moon-audio.com/oyaide-3-5mm-ultrasone-gold-plated-mini-plug-p-3-5-ghp.html

 

[gr4474]

IDK if either of these work, too late anyway I guess but FWIW:

Lunashops this one that mentions Hifiman specificallly, as well as some other "slim" options: https://www.lunashops.com/goods.php?id=7687

If you are looking for fancy bits, Oyaide make some for recessed sockets like this: https://www.moon-audio.com/oyaide-3-5mm-ultrasone-gold-plated-mini-plug-p-3-5-ghp.html

No it's not to late. Thank you

 

[cgb3]

Hello,
I'm looking for a quality 3.5 trs connector for a hifiman. It needs to be slim like the pic.
I found a couple on ebay but they look cheap. Thank you!

edit: I found these, but not sure they will fit?: https://www.redco.com/Redco-Male-3.5MM-Mini-TRS-Solder-Connector-Low-Profile.html
https://www.parts-express.com/connectors-adapters/audio-connectors/35-mm-mini-connectors/gender/Male

I'm auditioning products for the same cause. I'm not as committed to a slim package, as I am a good plug.

I just completed a balanced cable using Belden 8424 for my Hifiman Arya gen2. Although these tested (for continuity), if one rotates the plugs in the phones, sound cuts out in places. I'm going to try replacing with Rean (a subsidiary of Neutrik). I use Neutrik XLR connectors exclusively.

 

[silentraindrop]

I'm auditioning products for the same cause. I'm not as committed to a slim package, as I am a good plug.

I just completed a balanced cable using Belden 8424 for my Hifiman Arya gen2. Although these tested (for continuity), if one rotates the plugs in the phones, sound cuts out in places. I'm going to try replacing with Rean (a subsidiary of Neutrik). I use Neutrik XLR plugs and sockets exclusively.

Arya doesn't have recess at the 3.5mm so using the best quality connector makes sense. For cans like He6se/400se, there is a recess, so being thin or having extension is important(see my previous post). Rean 3.5mm will not clear recessed HFM cans.

 

[gr4474]

I'm auditioning products for the same cause. I'm not as committed to a slim package, as I am a good plug.

I just completed a balanced cable using Belden 8424 for my Hifiman Arya gen2. Although these tested (for continuity), if one rotates the plugs in the phones, sound cuts out in places. I'm going to try replacing with Rean (a subsidiary of Neutrik). I use Neutrik XLR connectors exclusively.

Rean has 2 items that pop up under the same number. You want the one that protrudes out, fitting into the headphones recess. Make sure you confirm that you are getting this one: https://www.markertek.com/product/n...3-5mm-mono-with-black-metal-handle-black-gold

 

[gr4474]

guesssssssss what arived today?

 

[gr4474]

Wait for it.......

 

[cgb3]

Rean has 2 items that pop up under the same number. You want the one that protrudes out, fitting into the headphones recess. Make sure you confirm that you are getting this one: https://www.markertek.com/product/n...3-5mm-mono-with-black-metal-handle-black-gold

The Arya doesn't require inboard plugs.

 

[gr4474]

sorry I thought HE6se thread

Edit: ok I went with 1 silver 1 black Rean 3.5, and https://www.performanceaudio.com/switchcraft-297-1-4-trs-stereo-phone-connector.html

Thank you for making me think quality first. This comment about 1/4" Neutrik NP3X vs Switchcraft 297 sold me on Switchcraft. Sure enough, look at the internals and he's right:
"I think 297's will wire up about $100 quicker - T & R with one pull of the iron, then with your jacket even with the top of the crimp fork, hitch the untinned shield around the back, then in and down alongside the opposite fork in an "L" or "7" - solder across the back"
"The 297's are bullet proof. All metal housing and only two pieces. Very solid connector that will last forever. Also, they have a one piece tip rod which will never break off into your gear. If you've ever pulled a 1/4" plug out of a piece of equipment and the tip was missing, you know what I am talking about."

Plus the Switchcraft looks fancy.

 

[Philimon]

Rean has 2 items that pop up under the same number. You want the one that protrudes out, fitting into the headphones recess. Make sure you confirm that you are getting this one: https://www.markertek.com/product/n...3-5mm-mono-with-black-metal-handle-black-gold

Newb question: does dual mono to XLR still work the same as a dual TRS to XLR? Specifically, HE6se to Jot2. It would still be “balanced” and Id get amp’s full capability?

What about dual mono to XLR with my T50RP - Open Alpha. I wired the female connectors to use tip and ring (on both channels). Would the same dual mono to XLR cable work with both HE6se and T50RP? I tried my stock HE6se XLR cable with Open Alpha but it didnt work…

 

[gr4474]

Yes mono plug works. TRS is not soldered on one pin, so it also works.

 

[Philimon]

Yes mono plug works. TRS is not soldered on one pin, so it also works.

TRS would work if I had soldered it appropriately for HFM 4-pin XLR. I originally wired Open Alpha to use with dual 3.5mm TRS to 3.5mm TRS.

So to be clear, If I buy a dual 3.5mm mono to 4-pin XLR it should work with both my Open Alpha and HE6se? Like this:
https://www.etsy.com/listing/1307333651/cablearchitecture-customizable-gotham?ref=cart

 

[VanHai]

TRS would work if I had soldered it appropriately for HFM 4-pin XLR. I originally wired Open Alpha to use with dual 3.5mm TRS to 3.5mm TRS.

So to be clear, If I buy a dual 3.5mm mono to 4-pin XLR it should work with both my Open Alpha and HE6se? Like this:
https://www.etsy.com/listing/1307333651/cablearchitecture-customizable-gotham?ref=cart

Hi Phil, it should work for you. Here are some more information how to build cables, hope it helps. https://redirect.viglink.com/?forma...ke_a_Four_Wire_Balanced_Line_Headphone_Cable_

 

[Philimon]

^ Great article! Thanks

I ordered the cable linked on etsy. Hopefully it works. I really like my Open Alpha, so thanks again @VanHai . I plan to write a comparison review later. Overall probably my favorite headphone amongst the ones I own and can trade blows with any of them.