[Feedbacker]

Only P- the light is blue for a few seconds followed by green.

Its not the green blinking (I guess 3 times) right after you power it up? This indicates Poly checking the micro SD.

Yes, it seems to go into Access mode when it is charged - mine did the same

 

[Feedbacker]

i cant get mine to connect to my network, odd I def have the correct networking, it doesn't always save either, it reboots, but flashes blue/green again, also if i put in a different network that does not exist it has saved it!!, bit not one that exists

Did you change the name of the Poly? It wouldn't save my wifi settings until I also changed the device name

 

[NYanakiev]

Downloaded the Chord Electronics android app. Couldn't find one called Gofigure - well, not for electronics purposes anyway.
Nice to get 4 month free trial with Roon too - haven't used it before so will be interested to see how good it is. $119 per annum not cheap.
Still unsure if micro-sd cards need formatting.

Weird, I only got two months free on Roon...

 

[audi0nick128]

I guess @Feedbacker is right. It may look like poly is already given as a Name during setup, but its not.

Honestly I think I may be the reason why this tip was added to the Manual

 

[NYanakiev]

Yes, it seems to go into Access mode when it is charged - mine did the same

Mine only charged for about 3 hours. I tried unplugging it and plugging it back in- light went back to white. It would stay white for a while and go back to green, blue, green, glue. I thought Poly was meant to keep on charging for 5-6 hours?

 

[RobA19]

Weird, I only got two months free on Roon...

Oops, my mistake! 2 months indeed.

 

[Feedbacker]

Mine only charged for about 3 hours. I tried unplugging it and plugging it back in- light went back to white. It would stay white for a while and go back to green, blue, green, glue. I thought Poly was meant to keep on charging for 5-6 hours?

Yep, after about 3 hours it turned itself into Access Point mode, presumably having reached full charged at that point.

 

[mp101]

Thanks for the siggestion, I had changed the name, it saves that fine, but I cannot get it to save any SSID's now, I'll charge it & the Mojo again and try tomorrow (it was/is fully charged)

Did you change the name of the Poly? It wouldn't save my wifi settings until I also changed the device name

 

[Mojo ideas]

Yep, after about 3 hours it turned itself into Access Point mode, presumably having reached full charged at that point.

Please ensure if you you have both the poly connected to the Mojo and you are charging both through the Poly that the charger is a two Ampere type or the Poly/ Mojo may not charge properly.
Always use a 2 Amp Charger.

 

[Feedbacker]

Please ensure if you you have both the poly connected to the Mojo and you are charging both through the Poly that the charger is a two Ampere type or the Poly/ Mojo may not charge properly.
Always use a 2 Amp Charger.

It was charging unconnected to the Mojo, and from an Anker Powerport, which I think gives 2.4A, so was getting plenty of juice...

 

[NYanakiev]

What apps are people using? I have been unable to find an app called "gofigure" for iOS. Bubbleupnp is not available either.

 

[audi0nick128]

What apps are people using? I have been unable to find an app called "gofigure" for iOS. Bubbleupnp is not available either.

Again the manual tells you to use Apps like Bubbleupnp on Android or 8Player on IOS.

Cheers

 

[Brushane]

I thought the Chord app would be released later, it was mentioned a few pages back. I'm sitting prepared with 8player lite installed on my iPhone. Only Poly is missing.

 

[Mojo ideas]

Yes, it seems to go into Access mode when it is charged - mine did the same

I still believe it’s not charged please charge it for a longer time period the first time you charge your poly as

What apps are people using? I have been unable to find an app called "gofigure" for iOS. Bubbleupnp is not available either.

the Go figure Application has to be signed off by Apple and Android in some way too this is being done but will take a few weeks

 

[Feedbacker]

I still believe it’s not charged please charge it for a longer time period the first time you charge your poly as

the Go figure Application has to be signed off by Apple and Android in some way too this is being done but will take a few weeks

You're right - thanks. Plugged it in again and now it's got a solid blue light. Is that fully charged?