unique123
New Head-Fier
- Joined
- Apr 19, 2016
- Posts
- 5
- Likes
- 13
There goes 1 person claims he has problem with fitting, the issue is as I feared the short nozzle... This usually vary case by case though.. so I think demo 1st is a must...
About it not being long though, some folks in IM series did have similar problem with their IM02, some fix it with adding one layer of a cut silicon bore to give extension (?) didn't reply catch what they mean, but you can check that thread for a probable fix.
I hadn't thought of trying to extend the nozzle, but I do have some Comply tips coming in. If the fit is still no good, I am probably sending these back instead of fiddling around, regardless of how good they sound at their current price point.
You can flip them and try the fit again. L to R and R to L. Raises the tube up higher some and should be tried.
Of course bending the memory wire right helps. You can be surprised that they may go a little deeper.
Don't know your ears but worth a try. I know that I look forward to a cable w/o a memory wire coming along sometime. And a bit shorter as I don't always need 1.6 meters.
Yes, I tried that last night but unfortunately there is no difference for me. I did bend the memory wire to a shape similar to my Epic cables, but I don't see how that would help with the fit issue, as the poor fit mainly stems from the short nozzle/raised nozzle base. For what it's worth, I removed the housing from the cables to see if I could get a good fit with just the housing, and still no go.
Sorry if I'm using any incorrect terminology!