gefski
1000+ Head-Fier
For those that have been looking at AOIP, I just posted my review of the Atterotech unDAES-O.
For those that have been looking at AOIP, I just posted my review of the Atterotech unDAES-O.
This is just a thought. I'm wondering now, if using a speaker system would have highlighted any difference (ie. soundstage, imaging).
Interesting thing Lyrebird APP ETH Network Audio
https://www.youtube.com/watch?v=1cR100Hs-Xw
I think you need another dante piece of hardware for it to work
Since I have to use the Dante Virtual Soundcard to output to my D16, should I assume that using a JCAT or SOtM USB card is not possible as it requires its own driver?
And if it is possible, where would I enable the driver to make it possible to use the card?
If you are asking if you can use both the ethernet output for the D16 and also a USB output on the same machine the answer is probably yes, but probably only one at a time.
If you are asking if you can set them both up to switch between two different chains without an issue or conflict the answer is probably yes also.
Try it using a normal USB port and then if that works try with one of the other add-on cards.
I had a PPA card in my server when I first moved to AOIP using a D16 but soon just removed and sold it.
Perhaps you are pondering trying out Robs newest USB path without risking what you already have set up
Easy - both are completely compatible. I use Foobar and would just change source from the DVS ASIO to the USB KS or ASIO under 'Devices'. In fact still have DVS ASIO showing up in my devices list, even though running USB.
But you can't do both at the same time - your music player needs to 'know' where to direct the audio music data stream down a Ethernet or USB pipe
Has anyone else been using their D16 without a router/switch/modem (Ethernet cable directly from PC to D16, and no Ethernet cable from D16 to router/switch/modem)? I'm sure it would work with RN3, but would have to connect to router first (wake-up port), then unplug and plug Ethernet cable from PC to RN3. For D16, just have an Ethernet cable on hand and plug one end into Primary, and other end into Secondary ports. Remove cable when D16 ports start flashing and then plug PC cable into D16 Primary or Secondary port. Without router/switch/modem - no FMC, optical cable, LPS needed for this connection anymore. Latency in my system dropped a bit more as well.
Obviously, you won't have an internet connection without a link to your modem. But, if you don't need the internet while listening to music, it might be something to consider.