1. themidsizelebowski

    Need help with STAX SR-009S Setup

    I am going to buy the STAX SR-009S earspeaker, but am a novice in the high-end audio world, and need some advice selecting a full setup (amp + preamp) that won’t limit the performance of the SR-009S. My reason for this purchase is that I used to have a STAX SR-L500mk2 with an SRM-252ii amp...
  2. Dyl2525

    Hello Everyone

    Hello everyone! super excited to be on here I just aquired a pair of hd800s recently and am loving them! Whats your guys favorite headphones?
  3. T

    AKG k371 good for first set of headphones?

    Hello! I’m looking at getting my first set of quality headphones. I’m after something that will suit a fairly eclectic taste in music, but a lot of rock, jazz and blues. budget is around $500AUD ($350USD/300EUR) but happy to go over if it’s really worth it. I’d like them to last quite some...
  4. Dancing Babamef

    Need for amp even if sound card (AE-5) can power 600ohm?

    I am starting to appreciate audio more and started recently listening to soundtracks of movies. My listening gear currently consists of a Sound BlasterX AE-5 and a GSP-600 (32Ω). I am thinking of buying the Beyer DT 990, the 600Ω one. Even though my sound card can drive 600Ω should I still...
  5. T

    Beginner

    I'm new to the whole audio world and I'm looking to buy a new paid of IEM's/Headphones. I've had Shure SE215's and they were great. I bought a paid of KS ZST's because they were cheap, but I find the highs a little too harsh. I've got around $200-$300 AUD to spend. I've been looking into buying...
  6. H

    Help on fixing a broken driver lead connector on a beyerdynamics DT770

    (wanted to post in DIY forum but can't because new member) so my cable connection to the driver lead broke and I decided to be louis rossmann for the day and solder it back together I've done it before on DT990 and it worked fine, what I ended up doing is soldering 2 leads and melting the one...
  7. M

    Help with headphones, dacs/amps

    I'm very new to all of this but have been doing a lot of reading on new headphones but can't decide what to buy. I don't have a DAC or amp. I will mostly use these headphones for gaming (often times competitive shooters like csgo) while on the call with friends and some light music listening or...
  8. M

    Monoprice Monolith MM-3 cuts out at low levels?

    Saw a review on amazon of someone complaining about it. Can someone confirm if this is true for these speakers? Or maybe this person just got a defective unit?
  9. M

    Which are the best drivers?

    As i was doing some research I came across a post (Which I can't seem to find again) where some people said uninstalling OEM drivers (If I remember correctly, in this case they were talking about the Audio Drivers that came with a Dell laptop) and just using Windows Audio Drivers gave them...
  10. DankAudio

    Tin t3 Balanced worth it?

    My audio setup consists of the tin t3 connected to the fiio M11. I was wondering whether spending money to buy a 4.4mmcx cable is worth it or not. Thanks!
  11. M

    Should I buy the HD 6XX? I'll be using no amp.

    So I have been reading that the HD 6XX works without an amp, (Source: A guy talking about that here on reddit), can some of the knowledgeable people from this forum confirm me this please? It is a big deal to me because I play rhythm games, so I need to avoid dac/amps to achieve the least...
  12. S

    Best DAP with Tidal // Google Play for CIEM use?

    I use CTM-500Elite CIEM’s and usually listen on my Pioneer XDP-100r which is great but there is a little noise floor that’s annoying at times, and I mostly use Tidal to stream especially in offline mode I want to upgrade new something new, I’ve looked at a lot of DAP’s out today’s and...
  13. Pinkomeno

    Aune X1S volume problem

    Hello, fellow readers! Did you ever had this sort of problem? "Windows Volume: 20%; AMP knob: 9 O' Clock; Volume pressure measured by a calibrated UMIK-1: 120 DBs" Like *** I can't listen to it at all, it's so loud I think I'm going stupid here. All my previous listening was by listening...
  14. S

    Need help with choosing some Bluetooth headphones

    So I was looking at kz s1, qcy qs2, mpwo flame 2 or mpow h7. I need them to be wireless bc my phone's jack broke and no store will repair it. I could get a micro USB to jack but that's too much of. Hassle for me. I could also buy a cheap mp3 off of AliExpress but I need your guidance. I'm no...
  15. zato23

    NEED HELP from Plantronics BackBeat PRO 2 owners

    I am trying to repair my Plantronics BackBeat PRO 2 and i need the board scheme I asked company to give it to me but they told me that they cant provide me such informations If someone who own this headphones can open them (it is very easy ,remove the earpads and then 4 screws on each side)...
  16. TFaile

    Balanced output issue with HIFIMAN Sundara

    I recently purchased a Shanling M6 to try out and it is my first DAP that has a 4.4mm balanced output. Shortly after receiving It I also purchsed a 4.4mm trrs to dual 3.5mm cable for my HIFIMAN Sundara. I have tried contacting customer support and no one has been super helpful whether it be...
  17. NA Blur

    Where did the "Unanswered" link go?

    Just curious if the "Unanswered" link was removed on purpose of was it missed when the site was revamped? It is a great way for those of us with some experience to answer new questions.
  18. M

    Hello there quick question about a good choice of amp/dac

    Hello everybody, So i wanted to but the dt 770 80 ohms but i've no idea what amp/dac i should buy alongside with it. I dont really know lot's about this stuff, i've searched online but couldn't find a clear answer, thanks in advance. my budget is tops 80 euros.
  19. Tail

    Sennheiser IE8/IE80/IE80s vs Sennheiser IE40 Pro

    I know it may sound weird due to price difference and Sennhsier's own naming of the products and all, but I am genuinely interested in comparison between these two. Recently I've found out about the world chi-fi and after hearing friend's 40$ earphone basically being on par with my 300$ Senn...
  20. Tail

    Budget Chi-Fi recommendation help

    Hey guys! Looking at TRN V90 vs CCA C12 vs Blon BL-03 vs GuideRay GR-i Could you recommend me between these 4 earphones based on some things I'm interested in? Sub bass - which has most of that low end sub-bass impact and slam Mid bass - which has the least bleed into the mids, that veil...
  21. M

    TFZ Tequila 1 vs Magaosi K3 Pro 2.0

    Can anyone please suggest from anyone of the above mentioned IEMs please
  22. Pinkomeno

    DT 1990 Pro: 2KHz Peak!?

    I hope I'm posting in the right place... anyhow: Some of you may know that I've got set on a ZMF Aeolus a while ago, but I still need to create songs and that's where I will always use my DT 1990 Pro. Now, yesterday I did a tone sweep and I found a VERY big peak at 2.2 KHz (2KHz with the B...
  23. 5

    a

    .
  24. Olafcx

    Questions about digital coax/optical

    Hi I use a mojo as a portable DAC. Unfortunately for some reason it's breaking down crazy fast and the micro USB input won't last much longer. Durability is awful. Got an early model I think. USB needs to be angled just right and even then I need to put a lot of force on it for it to not...
  25. A

    KZ Wired Headphones - Which to Choose?

    Hello. I am currently choosing the appropriate wired headphones. I decide between KZ ZS5, 6 or 10 (Pro). I would like to ask which would you rather recommend as the most suitable? I listen to film music: Avatar, Last Samurai, popular and classical music ... (no rock/metal) Which headphones...
Back
Top