drivers
-
I screw** up my HD580 drivers where do I buy replacements?
long story short I was going to clean hair off of some used hd580s I bought after having my HD600's die and the Membrane got damaged on the left side and somehow the right side became distorted because the foam in the spider cage disintegrated and one thing (one thing) led to another and here I...- HDGabe5636
- Thread
- drivers hd580 help help needed replacment
- Replies: 1
- Forum: Introductions, Help and Recommendations
-
Hello everyone. Yesterday I entered the "midrange" with my "new" HD580, but I have some questions.
I finally entered the "midrange" with my "new" HD580 for 170$ which is from a guy who apparently used it for 15 years. He almost sold it for 17$ as a mistake (I had to pay for it when it got delivered) but I corrected him later and he got the full asking price after I noticed him about the...- NKkrisz
- Thread
- beginner beginner setup drivers hardware headphone amp headphones sennheiser sennheiser hd580
- Replies: 6
- Forum: Introductions, Help and Recommendations
-
Can you damage your headphones with bass boost trough EQ when plugged directly into a motherboard?
So I accidentally ran my new HD 560S with an insane sub-bass boost in EqualizerAPO for about 2 days. My headphones are plugged in directly into my old gigabyte motherboard, no amp whoever volume is not a problem normally my Windows volume is somewhere between 10% and 20%. I didn't know much...- MainScentAuthor
- Thread
- bass boost damaged drivers equalization equalizer apo hd 560s help me peace sub bass
- Replies: 9
- Forum: Headphones (full-size)
-
Which Driver Technology?
Which driver technology do you prefer?- WILLJS
- Thread
- drivers technology
- Replies: 0
- Forum: Headphones (full-size)
-
Headphone Driver (speaker) Covers - How To Minimize Acoustic Diffraction ?
Starting last (2022) summer I began watching eBay for used Sony headphones in the 'MDR' family. I've had an MDR-V6 and MDR-7506 for years (most people consider them almost identical except for the 7506 being slightly 'brighter') and wanted to see how some of the other Sony headphones (in...- Paul WB5AGF
- Thread
- acoustic diffraction drivers sony mdr
- Replies: 0
- Forum: Headphones (full-size)
-
Aliexpress 40/50/70mm Drivers
There are quite a lot of choices for dynamic drivers on Aliexpress. Are there any drivers to avoid or go for? Looking to make a pair of custom headphones. Personally I want to go for a 50mm driver, but there seems to be 60mm or 70mm or in between so I'm not sure what to even look for. There's...- Thrown Rock
- Thread
- 50mm drivers aliexpress drivers
- Replies: 1
- Forum: DIY (Do-It-Yourself) Discussions
-
Looking for planar driver manufacturers!
Hi, I've been looking into entering the headphone production world and Im looking for a manufacturing company producing planar magnetic headphone drivers (custom design or pre-existing) which I can use in my project! Looking to produce Openback planar magnetic headphones with the best price to...- emilasty
- Thread
- drivers manufacturing help planar drivers production
- Replies: 3
- Forum: Introductions, Help and Recommendations
-
AIAIAI TMA-2 STUDIO WIRELESS+ Headphones
TMA-2 STUDIO WIRELESS+ Official Link: https://aiaiai.audio/headphones/tma-2-studio-wireless-plus Ultra-low latency and lossless audio with W+ Link technology. 16h playback time Signature AIAIAI bio-diaphragm speaker Added Bluetooth connectivity with +80h playback Enhanced comfort with...- Dobrescu George
- Head Gear item
- drivers dynamic link wireless
- Reviews: 1
- Category: Wireless
-
[SOLVED] Loxjie D10 DAC/amp with lots of issues - no driver worked so far
SOLVED by using Windows 10. Was struggling with the graphics card (drivers didn't want to install, so I updated the OS first), so my response was a bit delayed. Both D10 drivers worked. I was looking for a new desktop DAC that is better than my xDuoo Link and FiiO M3K and found Loxjie D10...- Rorik
- Thread
- dac drivers loxjie d10
- Replies: 3
- Forum: Introductions, Help and Recommendations
-
Advice req: Modding QC35 with new drivers.
Hello Headphone Experts and Audiophiles, I have a pair of QC35. Drivers are out of order. Out of warranty. No way to send to Bose for repairs as I live far from their offices. So I'm on my own, and would like to kindly request the forum's help. After some research I have determined that the...- kidodz
- Thread
- bose drivers mod help qc35
- Replies: 3
- Forum: Introductions, Help and Recommendations
-
H
FiiO K3 (new) initial impressions and a few questions.
I just bought a FiiO K3 (new) portable desktop amplifier/dac . Here is my initial impressions and a few questions. This is a good looking ,small unit . I used it both with Senn 598cs and Hifiman 400i. Power output is enough for Senn 598 on low gain. It is also more than loud on low gain for...- hseldon
- Thread
- dolby atmos headphone drivers fiiio fiio k3 windows sonic for headphones
- Replies: 1
- Forum: Portable Headphone Amps
-
O
Do headphones sound better when the drivers are further away from the ears?
Do headphones sound better when the drivers are further away from your ear? I'm developing the sentiment that headphones sound better when the drivers are further away from the ears. When the clamp force is strong the pads seem to push hard against your ears and the sound feels "forced" and...- Oluvs Buddy
- Thread
- distance drivers earpads
- Replies: 33
- Forum: Sound Science
-
50mm Driver Recommendations
I have a 50mm headphone shell and am looking for some drivers off aliexpress my budget is $60-$120. Hoping to make closed-back headphones with a wide sound stage with v-shaped signature crispy treble and warm bass, without having awful vocals. Has anyone had a good experience picking up drivers...- admaciaszek
- Thread
- 50mm aliexpress drivers headphone reccomendation
- Replies: 4
- Forum: DIY (Do-It-Yourself) Discussions
-
New driver? Mods? How to make these cans sound less muddy
I looked all over for on ear closed back headphones that had a list of features I wanted (one sided cable that's detachable, foldable, good build quality, comfortable, won't break the bank) and found my options were very limited. I ended up getting a like new pair of Urbanears Plattan 2s for...- ElectricKaibutu
- Thread
- bass heavy drivers mod help plattan
- Replies: 1
- Forum: DIY (Do-It-Yourself) Discussions
-
Sonion Balanced Armature Fan Thread
Hi I'd like to start discussion about implementations of the Sonion Balanced Armature drivers It should be especially worth for people who love sweet and detail vocals, since all known to me Sonion's tuned BA (also proprietary/custom ones) are very natural and musical, without losing resolution...- takeitblue
- Thread
- armature balanced armature drivers sonion
- Replies: 3
- Forum: Portable Headphones, Earphones and In-Ear Monitors
-
Symphones V8 Drivers for Grado
Symphones V8 Drivers for Grado I’ll let Rhydon Rayment introduce his company and philosophy: “Since 2010 Symphones has done more than refine an old tradition: we've started a new one. By fusing dynamic design with the vivid DIY culture we work to enable a new movement of designer artisans...- TravAndAlex
- Head Gear item
- diy drivers grado magnum mod modification sympones
- Reviews: 2
- Category: Headphones
-
Lots of questions with no answers
I've recently become very interested in sound systems, especially how everything works. (i.e. How digital to analog works, how do analog sound look, etc.) The main question I could not find any answers to was how do speaker drivers understand analog data sent to them. Are there any specific...- nhftk4320
- Thread
- analog drivers sound
- Replies: 2
- Forum: Introductions, Help and Recommendations
-
Driver updates for the Fostex HP series??
I hear the drivers are bunk on the Windows 10 content creators update. That's been out for a long while now. I'm in the market for an amp for my new TH900s and was looking hard at the HP-A8MK2 or HP-A4BL, but with support like this, I'm not so sure. Has there been any word on a fix? Any...- jdev
- Thread
- drivers fostex hp-a4bl hp-a8 th900
- Replies: 0
- Forum: Headphone Amps (full-size)
-
Impact of Incorrect Soldering of Triple drivers
Hello Head-fiers, I have a random question for you all. If you had an IEM multi driver (one of those ones you see that have 1 or 2 drivers stuck together) would it matter if you soldered the pads incorrectly? By incorrectly I mean if you soldered a cable directly on to one of the drivers and...- Designdude
- Thread
- advice diy drivers expert help iem soldering
- Replies: 2
- Forum: DIY (Do-It-Yourself) Discussions