No problems to answer. That is good amount, you can see that correct temperature has been used (and long enough but not too long) and the solder has 'sucked' the wire and pin completely and that amount makes it nice and secure solder. If it's overflowing that's too much. Less is ok too, if you...

Do you mean the chrome one's with carbon? I've had good experiences with QYFang and R Connector. Of course Neutrik would get you easily done and propably find it in your country.

Thanks! If so, I managed to get this first haha. The connectors look very nice, price is high IMO but worth it for a bit pricier cable (20 euro usual vs 120 euro or so for this). I like your cable a lot, the litz pattern is looking very sick and single color is what I was looking for at first...

Just ordinary china stuff cable. Came out pretty nice. 16awg I think it was for single litz cable. Was not sure of the color scheme but it turned out pretty.

Got new family member last friday, the VC is awesome!

Well, it may be time to get something else then. My M1060c is mostly headphones for VR-setup, changed Hirose-connectors and no grilles atm. I use on desktop Ether CX and mostly ZMF Aeolus LTD nowadays.

That looks cool, TH909 like. Was that made from my model from Thingiverse? Nice to see someone made so cool version from it.

Thanks for answering Zach. I can link this answer to the email too. I don't know if the seller tried to adjust it but it was sent to me like this. Good that they are also threadlocked like other parts, I don't need to worry about it down the line.

I got a pair from dealer in Finland. Promised I can return for refund if I'm not pleased and headphones are in mint condition so I was willing to give them a go. I've heard so much good and I was also thinking Verite Closed but a poor assembly worker made decision to get the Aeolus with Camphor...

I was a bit confused with the beginning but I assumr you got the dac/amp as you use drivers. With monoprice's drivers I got the same quality but if you don't use any drivers it gives you 32bit/358kHz, at least for me.

My mods, including pads, inner fazor adapters that makes pads go furter than original, outer fazor and a bit reflecting cups makes sometimes mids a bit more forward. Treble is about the same. Ether's have better separation and presentation but tonality seems to be pretty same; and the mids...

These two. These two are way way too much a like. Even comfort was so good on heavier M1060c that I even mixed these two three times when listening music and gaming. Maybe CX had a bit more soundstage and a bit less boom on bass but it punches as good. Maybe a bit more mids on M1060c but I only...

Check page 79 for discussion of planar's with this. I noticed it more after doing better fazor pad adapters that don't leak pressure. Right side does it a bit more than left.

Soo. This happened also, it was in my mind a loong time but now when I can do the 3D models myself I decided to try do this angled mod to get the 2,5mm off from my shirt. Wasn't sure should I use 2,5mm, 3,5mm or the mini XLR but I found them in my country so I didn't need to wait month or so...

Soo. I just got another idea. For the headband this time. I'm not a fan with the plasticy comfort strap. So I made one from leather harvested from one old leatherjacket. And the pins from original headband we're loose and it was much worse after I bended the forks to be straight and not hit the...

Nice, you too are getting good looks with the staining! I love the closed back one, I tried to make open one with that design. Openbacks are way to go for me but maybe I should try closed and make a pair for just in case. My model has pretty rough outside but you can sand it smooth. I'll post...

So first things first. I live in Finland so sending them will cost some money. But from the feedback now I decided to ask what would you people pay for these cups? It takes about 6+ hours to finish the prints and making the grilles, and around 15-20 hours on printing. If I'd make them from...

I'm just some ordinary guy who loves to do cool stuff. Thanks for the comment, really nice to have nice feedback!

So, I noticed that they do reflect some of the sound back and make them feel like semi open instead of fully open. So I needed earlier to order more wood PLA and I designed and made new cups. I really need some medical assistance with the phase of making these cups all the time. But these got...

Ok, now I did remember to publish the wood cups. It was a bit hidden after all but hope someone would enjoy them. I put a semi closed version there too.

It doesn't seem to effect so much when compared when the cups are off. I didn't hear any difference. I stained these with a stain with thinner in them, like paint thinner. I did stain them with a sweeping across using sponge and straight surfaces like the top of the cup needed a lot of stipple...

Got distracted from making the LCD-GX look when I realized how good ZMF headphones look. Well, my first 3D model and I came up with this. Side slots and shape are inspired from ZMF, and the open back is just what I came up with at work. Then sanded, walnut stain look and finishing oil. They look...

Damn, I got myself to print the black version of the slotted rounded grille like yours with the orange felt inside. I planned to put stainles steel net inside; like LCD-GX has.

There's a lot of pics but I wanted to show the Ali pads, outside fazors and the inside with the Shroomalistic's pad holders and I modded one 'full size pad holder fazor adapter' thing to fit just a good fazor to inside and sealed it with hot glue. I also have few dings and got one inside the cup...

Nice, now I'm going to use the pad adapter for upcoming Ali memoryfoam lambskin pads. Other grille designs would be nice too, I would defitinely try out for fun.