-
-
enregistree replied to the thread AudioT Technica ATH-AD900X replacement jack.Wires are insulated, not nice to work with. Depending on your equipment – you can use soldering pot, or solder flux and iron with hot...
-
enregistree replied to the thread Can i use a symmetrical (+9/-9V) Power Supply for 18V and +9V at the same time?.You can – if you hook it up as in diagram 2; but minus output (U2–) becomes GND for both devices.
-
enregistree replied to the thread Resistor values for in-line attenuators?.Attenuation makes sense for vintage gear, or generally if you happen to have too much gain in the system… I suggest that you add 4k7 in...
-
enregistree replied to the thread Yamaha MusicCast!.Thanks for mentioning it, yes musiccast is useless as dlna music player. I use other app – Glider for iOS these days. Musiccast app...
-
enregistree replied to the thread Yamaha MusicCast!.I use Yamaha as streamer source, with ethernet/DLNA (and airplay). Quick response, and it is stable. Volume level is fixed, and is not...
-
enregistree replied to the thread DIY Cable Gallery!!.Neutrik brand is OK for RCA connector, but next time – consider different model: https://www.neutrik.com/en/products/video/phono-rca
-
enregistree replied to the thread Audeze LCD-1.I had look at linked adapter and balanced cable connected to that adapter and to DAC will work. Dual jack looks like proprietary...
-
enregistree replied to the thread Audeze LCD-1.Left cup Tip positive, right cup Ring positive. Both have sleeve as negative (ground).
-
enregistree replied to the thread IEM cable wiring question.Yes, just connect 3 negative wires to ground at TRRS connector. GND is either S or R2.
-
enregistree replied to the thread Selecting wire for IEM cables.Cable impedance is important for low impedance IEMs, but wire size and flexibility is important. 20AWG fine strand silicone wire is...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…