You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
DIY Cable Gallery!!
- Thread starter HiGHFLYiN9
- Start date
-
- Tags
- cables rane rca-xlr-cables trs
NTK1
100+ Head-Fier
- Joined
- Jan 11, 2017
- Posts
- 161
- Likes
- 38
At first I thought I won't like the red/black combo. Turned out pretty good and matchy for my red Alpha Dog!
Did you sleeve each individual wire? If so what size wire did you use and where did you get the sleeve?
BillsonChang007
Headphoneus Supremus
Yeap I sleeve em one by one. Got them both off ebay. the sleeve is a paracord 2mm. And the cable is a 24AWG pure copper silver cableDid you sleeve each individual wire? If so what size wire did you use and where did you get the sleeve?
Can you post a link to the wire?Yeap I sleeve em one by one. Got them both off ebay. the sleeve is a paracord 2mm. And the cable is a 24AWG pure copper silver cable
Was the wire insolated? If not, is paracord enough insulation?
BillsonChang007
Headphoneus Supremus
It is insulated. Paracord was just for style only. Here's the link to the similar* product I bought http://www.ebay.com/itm/10M-Red-0-2...409643?hash=item3f4844d2eb:g:n8cAAOSwPYZU97CS bought mine long ago and I can't find the seller on Ebay during my short search.Can you post a link to the wire?
Was the wire insolated? If not, is paracord enough insulation?
The sleeve diameter is kinda small even for the cable. Make sure you straighten the cable as much as you can to easily sleeve in. Sound wise, I like it better than AD's stock canare cable. Cleaner, wider and deeper soundstage most importantly even tighter bass and better mids
BillsonChang007
Headphoneus Supremus
Dinnr
New Head-Fier
- Joined
- Apr 29, 2014
- Posts
- 18
- Likes
- 10
So I decided to try these little Y splitters from ebay:
They are very inexpensive, and only took about a week to arrive. They are also pretty small. I wanted to use one for the red and black cable I made recently (see a few posts back). Unfortunately the little holes were just small enough that they scrapped the wire insolation off as I moved it down the cable! So, I unbraided the section between the Y and the tips and was able to feed the 4 wires into each hole. I then rebraided. Fun! I think it turned out pretty well.
I'm still waiting for the tips to arrive, then I can terminate it properly.
Looks very nice, do they sell thinner ones? A little too wide for me.
That is left as an exercise to the student (to discover one that fits your needs).Looks very nice, do they sell thinner ones? A little too wide for me.
Energy
Member of the Trade: Artemis Fidelity
I have FREE parts for DIY if anyone is interested . First come first serve.
All I ask is that you pay for shipping which is about $3.
1. 25FT Clear 1/4" Heatshrink
2. 100FT Clear 3/16" Heatshrink
3. 100PCS Black & White LOD Connectors TYPE 1 (for older iPods, iPhones, or iPads)
4. 100PCS Black & White LOD Connectors TYPE 2 (for older iPods, iPhones, or iPads)
5. 500PCS Silver & Rhodium Plated 1/4" Plug (6.3mm) with white rings (instead of traditional black)
6. 50PCS Standard & Performance USB Connectors (3U Gold Plating)
7. ~60FT 7N OCC Copper (insulation has turned yellow from aging)
8. iFi iLink USB Input Board (don't ask me how I got this)
9. Generic Solder Sucker
10. ~30FT NavShips Silver Plated Copper Teflon Wires (shielded) in 14AWG & 16AWG
11. 3.5mm to Monster RCA made from 7N PlusSound Wires (still good)
P.S. I AM LOOKING FOR 2 PCS RHODIUM PLATED RCA COVER CAP
- If you have this for trade, I will prioritize your request above everyone elses.
- I have 2 PCS Gold Plated XLR Female Cover Cap I can trade for it if interested.
All I ask is that you pay for shipping which is about $3.
1. 25FT Clear 1/4" Heatshrink
2. 100FT Clear 3/16" Heatshrink
3. 100PCS Black & White LOD Connectors TYPE 1 (for older iPods, iPhones, or iPads)
4. 100PCS Black & White LOD Connectors TYPE 2 (for older iPods, iPhones, or iPads)
5. 500PCS Silver & Rhodium Plated 1/4" Plug (6.3mm) with white rings (instead of traditional black)
6. 50PCS Standard & Performance USB Connectors (3U Gold Plating)
7. ~60FT 7N OCC Copper (insulation has turned yellow from aging)
8. iFi iLink USB Input Board (don't ask me how I got this)
9. Generic Solder Sucker
10. ~30FT NavShips Silver Plated Copper Teflon Wires (shielded) in 14AWG & 16AWG
11. 3.5mm to Monster RCA made from 7N PlusSound Wires (still good)
- TO-220 Heatsink (10)
- Neutrik 3-Pin Male (5) & Female XLR's (7)
- Palics RCA Connectors (2)
- Monoprice RCA Connectors (7)
- BNC Chassis Mount Connector
- 3.5mm to 6.3mm adapter (5)
- 6.3mm to 3.5mm adapter (1)
- AKG 3-Pin Mini XLR (4)
- Audeze 4-Pin Mini XLR (6)
- Double Helix 3.5mm Plug (1)
- USB Connectors (2)
- Plugs without housing (2)
- 4-Pin Male Mini XLR (2)
- DIY Power IEC Connector (2)
- Leftover Generic Film Capacitors (for decoupling purposes)
P.S. I AM LOOKING FOR 2 PCS RHODIUM PLATED RCA COVER CAP
- If you have this for trade, I will prioritize your request above everyone elses.
- I have 2 PCS Gold Plated XLR Female Cover Cap I can trade for it if interested.
Last edited:
I have FREE parts for DIY if anyone is interested . First come first serve.
All I ask is that you pay for shipping which is about $3.
1. 25FT Clear 1/4" Heatshrink
2. 100FT Clear 3/16" Heatshrink
3. 100PCS Black & White LOD Connectors TYPE 1 (for older iPods, iPhones, or iPads)
4. 100PCS Black & White LOD Connectors TYPE 2 (for older iPods, iPhones, or iPads)
5. 500PCS Silver & Rhodium Plated 1/4" Plug (6.3mm) with white rings (instead of traditional black)
6. 50PCS Standard & Performance USB Connectors (3U Gold Plating)
7. ~60FT 7N OCC Copper (insulation has turned yellow from aging)
8. iFi iLink USB Input Board (don't ask me how I got this)
9. Generic Solder Sucker
10. ~30FT NavShips Silver Plated Copper Teflon Wires (shielded) in 14AWG & 16AWG
11. 3.5mm to Monster RCA made from 7N PlusSound Wires (still good)
I'm cleaning out my workshop and will find lots more stuff so be on the lookout.
- TO-220 Heatsink (10)
- Neutrik 3-Pin Male (5) & Female XLR's (7)
- Palics RCA Connectors (2)
- Monoprice RCA Connectors (7)
- BNC Chassis Mount Connector
- 3.5mm to 6.3mm adapter (5)
- 6.3mm to 3.5mm adapter (1)
- AKG 3-Pin Mini XLR (4)
- Audeze 4-Pin Mini XLR (6)
- Double Helix 3.5mm Plug (1)
- USB Connectors (2)
- Plugs without housing (2)
- 4-Pin Male Mini XLR (2)
- DIY Power IEC Connector (2)
- Leftover Generic Film Capacitors (for decoupling purposes)
How much for shipping to the UK?
PM sent forI have FREE parts for DIY if anyone is interested . First come first serve.
All I ask is that you pay for shipping which is about $3.
1. 25FT Clear 1/4" Heatshrink
2. 100FT Clear 3/16" Heatshrink
3. 100PCS Black & White LOD Connectors TYPE 1 (for older iPods, iPhones, or iPads)
4. 100PCS Black & White LOD Connectors TYPE 2 (for older iPods, iPhones, or iPads)
5. 500PCS Silver & Rhodium Plated 1/4" Plug (6.3mm) with white rings (instead of traditional black)
6. 50PCS Standard & Performance USB Connectors (3U Gold Plating)
7. ~60FT 7N OCC Copper (insulation has turned yellow from aging)
8. iFi iLink USB Input Board (don't ask me how I got this)
9. Generic Solder Sucker
10. ~30FT NavShips Silver Plated Copper Teflon Wires (shielded) in 14AWG & 16AWG
11. 3.5mm to Monster RCA made from 7N PlusSound Wires (still good)
I'm cleaning out my workshop and will find lots more stuff so be on the lookout.
- TO-220 Heatsink (10)
- Neutrik 3-Pin Male (5) & Female XLR's (7)
- Palics RCA Connectors (2)
- Monoprice RCA Connectors (7)
- BNC Chassis Mount Connector
- 3.5mm to 6.3mm adapter (5)
- 6.3mm to 3.5mm adapter (1)
- AKG 3-Pin Mini XLR (4)
- Audeze 4-Pin Mini XLR (6)
- Double Helix 3.5mm Plug (1)
- USB Connectors (2)
- Plugs without housing (2)
- 4-Pin Male Mini XLR (2)
- DIY Power IEC Connector (2)
- Leftover Generic Film Capacitors (for decoupling purposes)
P.S. I AM LOOKING FOR 2 PCS RHODIUM PLATED RCA COVER CAP
- If you have this for trade, I will prioritize your request above everyone elses.
- I have 2 PCS Gold Plated XLR Female Cover Cap I can trade for it if interested.
- the heat shrink
- some of the 1/4" TRS plugs
- all the RCA connectors
- 3.5mm to 6.3mm adapter (5)
- 6.3mm to 3.5mm adapter (1)
- Audeze 4-Pin Mini XLR (either 2 or all six)
- Double Helix 3.5mm Plug (1)
- 3.5mm to Monster RCA made from 7N PlusSound Wires (still good)
- ~30FT NavShips Silver Plated Copper Teflon Wires (shielded) in 14AWG & 16AWG
NTK1
100+ Head-Fier
- Joined
- Jan 11, 2017
- Posts
- 161
- Likes
- 38
Here is my semi budget build. 24AWG speaker wire and plussoundaudio plugs. I bought the speaker wire to practice my braiding and liked it so much I decided to complete it.
Audiotistic
100+ Head-Fier
Here is my semi budget build. 24AWG speaker wire and plussoundaudio plugs. I bought the speaker wire to practice my braiding and liked it so much I decided to complete it.
Very nice! This is exactly what I want to do, right down to the plussound plug. Did you just put some heat shrink tubing on the y split?
NTK1
100+ Head-Fier
- Joined
- Jan 11, 2017
- Posts
- 161
- Likes
- 38
Very nice! This is exactly what I want to do, right down to the plussound plug. Did you just put some heat shrink tubing on the y split?
Yea. I had the splitter too but won't fit since the 2 wires are about 5mm wide together
Users who are viewing this thread
Total: 7 (members: 0, guests: 7)