[zach915m]

For those familiar with the spreadsheet process, what comes after ‘assembly’?

After assembly comes quality check/control "QC" then they ship after that. I am also waiting for my Verite to ship, I've been refreshing the sheet every hr

For those waiting for Verites - we have a batch of all of the last ziricote and silk sets going and they all will be completed I'm the week after we get back from canjam. So no updates the next few days but expect them to ship in the first week or so of August 1st to 7th or so.

 

[nishan99]

I drive aeolus with feliks otl, i find the pairing end game for me. I assume the more you spend the more you get, with tube rolling etc. When i will get the psaudio nuwave i will set for a while and enjoy the setup. Also verite should be ships in these days

How well do feliks amps pair with ZMFs? is there a plenty of headroom? because their power specs are pretty low

I want to get the Euforia and I don't know if it's worth it.

 

[Zachik]

How well do feliks amps pair with ZMFs? is there a plenty of headroom? because their power specs are pretty low

I want to get the Euforia and I don't know if it's worth it.

I have actually auditioned this combo last month at CanJam SoCal, and IMHO it is a very good pairing!
Only spent 10 minutes with it (trying not to be a jerk and allow others to audition as well), but definitely left a positive impressions. I personally own the Woo Audio WA6 and the Glenn OTL, and (again IMHO) the Feliks falls in between both in price and performance. Definitely enough power to drive the ZMF cans

 

[LoryWiv]

How well do feliks amps pair with ZMFs? is there a plenty of headroom? because their power specs are pretty low

I want to get the Euforia and I don't know if it's worth it.

I am listening through ZMF Auteur powered by Feliks Audio Elise as I type, absolute pleasure, euphonic signature with plenty of volume (potentiometer < 1/3 up.) YMMV.

 

[lentoviolento]

How well do feliks amps pair with ZMFs? is there a plenty of headroom? because their power specs are pretty low

I want to get the Euforia and I don't know if it's worth it.

With espressivo i have never went past 11,30 even if i listen at 75/80db... Zero distortion, otl bliss. I sold it for a totl hand made amp, then got scammed so my budget is on the low side. And i ordered without thinking twice feliks echo also because an headfier sad that had a little more crunch amd bit then elise. With his atticus.

 

[Wildcatsare1]

How well do feliks amps pair with ZMFs? is there a plenty of headroom? because their power specs are pretty low

I want to get the Euforia and I don't know if it's worth it.

I’m listening to the Vérité throughout a Euforia at the moment, to Dylan “Blonde on Blonde” and in a word, it’s spectacular! This is through the Stock Tubes, I have an upgraded set winging it way from France, very excited. Beautiful, deep, wide soundstage, not quite as big as the WA5, but better imaging within the soundstage which suits Dylan well.

 

[UsoppNoKami]

Just gave my Pheasantwood Verite cups a wax. Looking spiffy!



And a friend left his teak Auteur's with me for a listen, so here's a shot of 4 glorious headphones with some wood on them

 

[whirlwind]

Just gave my Pheasantwood Verite cups a wax. Looking spiffy!



And a friend left his teak Auteur's with me for a listen, so here's a shot of 4 glorious headphones with some wood on them

They look great on about $700 worth of awesome headphone stands

Question for you....with your LCD cans, can you leave the cable plugged in and not have them bottom out with this stand ?

Also, do the pads compress or stay apart with this stand ?

Thanks for any info.

Those Verite look great polished up!

 

[UsoppNoKami]

They look great on about $700 worth of awesome headphone stands

Question for you....with your LCD cans, can you leave the cable plugged in and not have them bottom out with this stand ?

Also, do the pads compress or stay apart with this stand ?

Thanks for any info.

Those Verite look great polished up!

Heya Joe,

These are the metal Room's Pro line stands so they have adjustable height - I usually leave the cables plugged into one of the cans and they do not run afoul of the desk or base. The wooden version is quite a bit shorter, you would have to shorten the headphone rods to avoid the cable connectors bottoming out. As for the pads, they get to breathe - nothing in the middle to compress them.

Cheers,
KJ

 

[whirlwind]

Heya Joe,

These are the metal Room's Pro line stands so they have adjustable height - I usually leave the cables plugged into one of the cans and they do not run afoul of the desk or base. The wooden version is quite a bit shorter, you would have to shorten the headphone rods to avoid the cable connectors bottoming out. As for the pads, they get to breathe - nothing in the middle to compress them.

Cheers,
KJ

Thanks much for the info.....just what I wanted to hear.
I see an e-bay seller has them listed now. I just ordered the black pro line.
Thanks again.

 

[UsoppNoKami]

Thanks much for the info.....just what I wanted to hear.
I see an e-bay seller has them listed now. I just ordered the black pro line.
Thanks again.

@zach915m has some sexy new ZMF wooden headphone stands launching in 2 days that you might want to consider as well mate

 

[whirlwind]

@zach915m has some sexy new ZMF wooden headphone stands launching in 2 days that you might want to consider as well mate

Any pics available anywhere ?

I usually only have one of my headphones on a stand at a time.

 

[UsoppNoKami]

Any pics available anywhere ?

I usually only have one of my headphones on a stand at a time.

https://www.instagram.com/p/B0nTpUwJzV3/?hl=en

https://www.instagram.com/p/BytI-9bpGjA/?hl=en

https://www.instagram.com/p/B0P00EkJESd/?hl=en

@BooUrns @zach915m over to you lol

 

[aloki]

That Katalox is a thing of beauty!

 

[zach915m]

It's up and ready for shipping!

https://www.zmfheadphones.com/zmf-originals/salire