X-PLANE
New Head-Fier
- Joined
- Oct 25, 2007
- Posts
- 31
- Likes
- 13
Does anyone use both the DA8 outputs (XLR's and RCA) to separate components? Have mine going to two amps using one at a time for A/B'in.
Sorry if I bumped this subject a bit..
Thanks
Does anyone use both the DA8 outputs (XLR's and RCA) to separate components? Have mine going to two amps using one at a time for A/B'in.
Sorry if I bumped this subject a bit..
Thanks
Yes I did this all the time when I used my DA8 as main DAC, XLR went to the A18 and the RCA went to the V200. The DA8 has no problem feeding both amps at once.
I have a Yulong D200, I'm wondering if update to DA8 is worth?
Version2 of the DA8 is worth getting, Yulong changed out the master clock in the dac and used a high precision clock. from Crystek.
Unfortunately Yulong bumped up the price by 8-10%.
I have Version1 of the DA8 and I upgraded the master clock in a similar fashion and got good results.
May I ask how did you upgrade the master clock in a similar fashion?
Thanks for the pics.
Was it an easy task to complete? Did you require the use of a soldering iron? Where did you get the master clock from?
The master clock is the rectangular metal can near the ES9018 chip. I replaced it with the Crystek CCHD950-25-100M which is the exact unit Yulong is now using on the DA8 II.
This mod was done abut 9 months ago
Here are the different master clocks I experimented with. The original Yulong masterclock is at the bottom.
Thanks for the detailed information for the modification!
I recently reviewed Yulong DA8II, and indeed I hear good improvement as compared to my old DA8