CharlyBrown
1000+ Head-Fier
Does anybody know when the R2R DAC card will be available?
I replaced the capacitors on the op amp board to a shorter model. Specifically, I replaced the original Panasonic 16SEPC100MW with 16SEPC100M. They have the same capacitance and voltage specs but different ESRs. I thought maybe it's no big deal. The obvious advantage is excellent clearance for discrete op amps like the Sparkos. I can't tell if there is any difference in terms of sound. Now it's possible to try even bigger op amps, such as the SA200 from LIEEWHO.
Thanks very much. Looking forward to your take on things.Here is my XD-05 Pro setup using a pricely cheap player (Ruizu D29) via Bluetooth and have the XD-05 Pro doing the DAC and AMP work. For the Amps I have installed the Sparkos SS3602. In the box I have (from left to right: Lieewho EQ200, Oracle III 02 with headsinks, in gold the AkLIAM VV8, Oracle II 02 and the stock opamps (which I have not tested yet).
My favorite DAC Module is the ROHM (makes the sound complete, as I want to have on how music should sound). the default IEMs ThieAudio Prestige LTD.
short summary on opamps (in liking of the sound):
- Lieewho EQ200 (physically slightly bigger then the sparkos and you can fiddle them into the XD-05 Pro)
- Sparkos SS3602
- Oracle III 02
- AkLIAM VV8, Oracle II 02
I will do more listening and combining DAC Modules with different opamps and make a more detailed review (on what I like regarding on the sound not the technical curves etc).
Would I buy those opamps again. yes, because it gives me to freedom in switching and mixing and being wondered on how the music will sound.
I actually sent an email to Xduoo and asked if they sell the op-amp board as a spare part. Like people tried this earlier, I believe the message was completely ignored. I think 24mohm is a pretty low resistance value to start with. The reduction of height is really alluring. Maybe the filtering ability is lowered. I have an oscilloscope but didn't bother to test the result. The capacitors are probably filtering the high-frequency signals going back to the power supply, not the DC power per se. I really can't tell a difference by listening. But obviously I can't do A/B tests easily.From what I read,
16SEPC100MW has 10mohm ESR
while
16SEPC100M has 24mohm ESR
Capacitors with lower ESR are usually better, because they are able to respond better to fast transients of power demand, and therefore (essentially) perform their power supply filtering function better.
If then, in the specific case, what and how much difference this could make, I really don't know how to judge.
Agree, an additional Op-Amp board would be very useful thing if we could purchase it separately and with the reverse contacts it would be even better, to make an option to extend for a bigger op-amps to fit in.I actually sent an email to Xduoo and asked if they sell the op-amp board as a spare part. Like people tried this earlier, I believe the message was completely ignored. I think 24mohm is a pretty low resistance value to start with. The reduction of height is really alluring. Maybe the filtering ability is lowered. I have an oscilloscope but didn't bother to test the result. The capacitors are probably filtering the high-frequency signals going back to the power supply, not the DC power per se. I really can't tell a difference by listening. But obviously I can't do A/B tests easily.
Would the Sparkos Labs SS3602 Dual Discrete OPA DIP8 work within the confines of the xDuoo XD05PRO?Just filter that list with DIP8 and look for Dual op-amps.
Would the Sparkos Labs SS3602 Dual Discrete OPA DIP8 work within the confines of the xDuoo XD05PRO?
Thanks Fer!!!Yes, they work.
With some mechanical adaptation if you want to insert and remove them easily, or without any mechanical adaptation, but it is more difficult to insert and remove them.
There are many posts on the topic.
You can start here, if you want:
https://www.head-fi.org/threads/xduoo-xd05pro.964620/post-17719888
Yes, you will need two of themHi, if i want to change default opamp with sparkos, i need to buy 2 sparkos 3602 to install?
If you don’t want to mess around with the op-amp board, make sure to buy 2 DIP-8 risers as well. This way the Sparkos will fit in without any modifications. I have them in my XD05Pro, sounds amazing with a clean background.Would the Sparkos Labs SS3602 Dual Discrete OPA DIP8 work within the confines of the xDuoo XD05PRO?
Excellent, thanks Nioh for the quick tip. I'm considering buying this "portable amp" because I'd heard really good things about it.If you don’t want to mess around with the op-amp board, make sure to buy 2 DIP-8 risers as well. This way the Sparkos will fit in without any modifications. I have them in my XD05Pro, sounds amazing with a clean background.