You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Woo's New Flagship WA33
- Thread starter CarlosUnchained
- Start date
Contrails
500+ Head-Fier
- Joined
- Jan 30, 2013
- Posts
- 989
- Likes
- 861
Deleted.
Polygonhell
100+ Head-Fier
Both my WA33 and 3ES have that metal ping too until the tubes warm up. It doesn’t last long at all and then it goes away completely. I was under the impression that it was normal
mine has done it since I swapped regulators RCA 5U4G to KR SE 5U4G a year or so ago.
Never did it with the RCA, I had assumed it was a function of the KR Regulator, but I guess not.
Finally got around to upgrading the power tubes so now have a fully upgraded amp and went with emission labs 2A3 Solid plates so now running emission labs power tubes and rectifier along with We417A's for the driver tubes.
The biggest difference i've noticed so far is much better tonal density and weight to everything, its a thicker sound overall with more warmth. It's especially noticeable on the susvara which sounded a little thin before with the stock power tubes. Can't wait to burn them in more and hear more changes, this upgrade has definitely taken the wa33 up another in overall sound quality.
Next I'm going to try an elrog 5U4G recitifer and then at some point will get the takatsuki 2a3's but the price for them is extremely painful
The biggest difference i've noticed so far is much better tonal density and weight to everything, its a thicker sound overall with more warmth. It's especially noticeable on the susvara which sounded a little thin before with the stock power tubes. Can't wait to burn them in more and hear more changes, this upgrade has definitely taken the wa33 up another in overall sound quality.
Next I'm going to try an elrog 5U4G recitifer and then at some point will get the takatsuki 2a3's but the price for them is extremely painful
Last edited:
Finally got around to upgrading the power tubes so now have a fully upgraded amp and went with emission labs 2A3 Solid plates so now running emission labs power tubes and rectifier along with We417A's for the driver tubes.
The biggest difference i've noticed so far is much better tonal density and weight to everything, its a thicker sound overall with more warmth. It's especially noticeable on the susvara which sounded a little thin before with the stock power tubes. Can't wait to burn them in more and hear more changes, this upgrade has definitely taken the wa33 up another in overall sound quality.
Next I'm going to try an elrog 5U4G recitifer and then at some point will get the takatsuki 2a3's but the price for them is extremely painful
How did u decide on EML 2a3 over KR 2a3?
After using the Elrog 5u4g for a few weeks, I swapped back to the Tak274b tube. the Tak is quite mellow sounding in comparison; smooth, lush, rounded. the Elrog seems more transparent, airy, clear and dynamic. I ended up preferring the Tak with the Utopia and Abyss, and the Elrog with the SolP and Caldera.
I feel those looking for rectifiers with different/contrasting sounds should really consider these two tubes in their collection.
I feel those looking for rectifiers with different/contrasting sounds should really consider these two tubes in their collection.
ColSaulTigh
Headphoneus Supremus
One of us! One of us!After using the Elrog 5u4g for a few weeks, I swapped back to the Tak274b tube. the Tak is quite mellow sounding in comparison; smooth, lush, rounded. the Elrog seems more transparent, airy, clear and dynamic. I ended up preferring the Tak with the Utopia and Abyss, and the Elrog with the SolP and Caldera.
I feel those looking for rectifiers with different/contrasting sounds should really consider these two tubes in their collection.
fabiocrest
New Head-Fier
Finally got around to upgrading the power tubes so now have a fully upgraded amp and went with emission labs 2A3 Solid plates so now running emission labs power tubes and rectifier along with We417A's for the driver tubes.
The biggest difference i've noticed so far is much better tonal density and weight to everything, its a thicker sound overall with more warmth. It's especially noticeable on the susvara which sounded a little thin before with the stock power tubes. Can't wait to burn them in more and hear more changes, this upgrade has definitely taken the wa33 up another in overall sound quality.
Next I'm going to try an elrog 5U4G recitifer and then at some point will get the takatsuki 2a3's but the price for them is extremely painful
Anyone try kr 5u4g ?One of us! One of us!
Polygonhell
100+ Head-Fier
I have one in mine, the SE, not the RK Anniversary (though I have one of those as well).Anyone try kr 5u4g ?
Short version, the Anniversary RK version is my favorite 5U4G, the SE is a small step down, they are both like a super RCA, on the dry side, very open and transparent.
But I haven't heard the Emission Labs.
As I said I'd take the RK version (I don't believe there is currently a way to buy one) over the standard, but the standard is very good.
The RK version is in my Lampizator DAC ATM.
ColSaulTigh
Headphoneus Supremus
I have used the KR/RKAE 5U4G's in my Woo WA5-LE, and they are dry and strong (bold, is how I describe them). The Elrog are a touch warmer and even more "body" behind them. EML are slightly lazy, providing warmth and a touch of softness for a more romantic sound.
The KR/RKAE's have dried up. Lukasz's son (who ran Best300B.com) has closed up shop, and with that, the only access to them. Eunice Kron has said that Felikz had an exclusive on them (as mentioned, they're used in his Lampizator DACs). I've seen them used from time to time on USAM. Nothing lately though...
The KR/RKAE's have dried up. Lukasz's son (who ran Best300B.com) has closed up shop, and with that, the only access to them. Eunice Kron has said that Felikz had an exclusive on them (as mentioned, they're used in his Lampizator DACs). I've seen them used from time to time on USAM. Nothing lately though...
fabiocrest
New Head-Fier
About the 6c45 pre tube something has tried ehx gold or 6s45p Russian tube over the stock tube ?
fabiocrest
New Head-Fier
Great tube !Finally got around to upgrading the power tubes so now have a fully upgraded amp and went with emission labs 2A3 Solid plates so now running emission labs power tubes and rectifier along with We417A's for the driver tubes.
The biggest difference i've noticed so far is much better tonal density and weight to everything, its a thicker sound overall with more warmth. It's especially noticeable on the susvara which sounded a little thin before with the stock power tubes. Can't wait to burn them in more and hear more changes, this upgrade has definitely taken the wa33 up another in overall sound quality.
Next I'm going to try an elrog 5U4G recitifer and then at some point will get the takatsuki 2a3's but the price for them is extremely painful
Attachments
Cali911
New Head-Fier
Hello all. I just wanted to dip my toes in this thread. I've been a long time stalker.
I have a Woo WA33 EE incoming (hopefully it will arrive this week or next week). I am looking forward to re-reading this thread, and after a while - some tube rolling.
For starters, I am going to use the Abyss 1266 TC, Utopia 22 and LCD 4. I also have a Raal Sr1b I am going to try with it. I'm adding a Lina to up my DAC game from my current Chord Hugo 2.
Thanks for keeping this threading current for someone late to the game.
I have a Woo WA33 EE incoming (hopefully it will arrive this week or next week). I am looking forward to re-reading this thread, and after a while - some tube rolling.
For starters, I am going to use the Abyss 1266 TC, Utopia 22 and LCD 4. I also have a Raal Sr1b I am going to try with it. I'm adding a Lina to up my DAC game from my current Chord Hugo 2.
Thanks for keeping this threading current for someone late to the game.
Hello all. I just wanted to dip my toes in this thread. I've been a long time stalker.
I have a Woo WA33 EE incoming (hopefully it will arrive this week or next week). I am looking forward to re-reading this thread, and after a while - some tube rolling.
For starters, I am going to use the Abyss 1266 TC, Utopia 22 and LCD 4. I also have a Raal Sr1b I am going to try with it. I'm adding a Lina to up my DAC game from my current Chord Hugo 2.
Thanks for keeping this threading current for someone late to the game.
Congrats man! sounds like a dream system lineup!
I couldn't get the sr1b to sound right with my wa33. perhaps you will have better luck! but I think you'll have much better results running them off your speaker setup with the ti1b box.
Cali911
New Head-Fier
Thanks - I was going to try the T1b box with the WA 33. I guess I will see how it goes.Congrats man! sounds like a dream system lineup!
I couldn't get the sr1b to sound right with my wa33. perhaps you will have better luck! but I think you'll have much better results running them off your speaker setup with the ti1b box.
Users who are viewing this thread
Total: 2 (members: 0, guests: 2)