Dark Helmet
1000+ Head-Fier
- Joined
- Feb 9, 2013
- Posts
- 1,053
- Likes
- 175
You're all a bunch of tools.
You're all a bunch of tools.
We try
(You should use an IC remover, i'm lazy and even my fingers which are not particularly fat have trouble getting a good grip on the opamp. I use pliers sometimes, but this is bad practice and you shouldn't do it)
Can anyone tell me what brand these 5532's are?
it's Fairchild, acquired by ON Semiconductor last year..
Not that it answers your question, when I looked on ebay there were a bunch that looked like silverre's adapter in that picture. They all had a 2nd AD825 mounted on the bottom of that adapter to create a dual to mono.
These are the ones I got fwiw.
http://www.ebay.com/itm/351037907534?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
silverre yeah yours is fine, the adapter legs and spacers take up more room so it'll be taller for sure.
Saw some muses01 and muses02 on eBay for about $16 shipped from china, should I even bother trying them ?
http://m.ebay.com/sch/i.html?_nkw=Muses01&isNewKw=1&isRefine=true&mfs=GOCLK&acimp=0&sqp=muses01&_sop=15
The pics can be deceiving but the dip-8 male socket pins show that the pcb board is about the normal Walnut receiver socket size, and if a Burson thing can fit, then these types will no problemo.
It's the double wide ones on the pcb that seem to go the wrong way and will bump things.
( like 2 regular sized dip-8 opamps on an adapter= these smaller soic ones are tiny )
I did try to see about fitting a fully discrete opamp dip-8 unit in here like one of the Sparkos but from what I could tell it was larger than the Bursons and would not fit ( it would hit the pushbutton shafts badly )
I was so crazy about it I took the burson pictures and then their measurements, and blew up a picture to life-size on the screen to see if the larger Sparkos thing would fit using a flexible measuring tape LOL.
^so yeah it'll work it is the same size as the LME49990 unit I tried out.
Hi all. First time posting! Was a long time lurker but getting a walnut v2 made me want to create an account.
I'm very happy that I bought this tiny wonderful thing. I've been reading the thread and got excited about op amps and rolling and bought the muses 01 and muses 02. I have a question about the AD825 amps can I get them already soldered on those board things? The only ones I see in Aliexpress are just the chips themselves not connected to anything.
Also Silverre I believe you got yours in correctly the semi-circle on the chip should align with the semi-circle on the board.
These are the AD825 units I got for what it's worth
http://www.ebay.com/itm/351037907534?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
silverre yeah yours is fine, the adapter legs and spacers take up more room so it'll be taller for sure.
Yep i got the same one if it helps any1 else looking to procure an ad825.
Thanks every1 that helped
I am also interested in the suspicious cheapo muses02 XD