TrollDragon
Headphoneus Supremus
EoM build... 2.5mm Hollow Ekowool over Mesh with 5x.1mm ribbon.
Arrived yesterday from 3F, Squape Rs.
Arrived yesterday from 3F, Squape Rs.
20ga? that must be a typo. or is it? i did the 200 mesh core and 400 at the very top. i have yet to try any nichrome 80. that may be my next venture. i should be getting that k.loud+g clone here real soon too. i am enjoying the nextgen, but it's deff more of a mouth to lung atty.
20g dual coil 2.5mm or so 0.08. This is what I'm preferring in the Aeronaut to any clapton or tiger coils. Biggest pain in the ass I find is
thicker wire like 20g is a fickle process to get those plates to clamp down for a completely secure connection. There is a work around, though.
Capture a lead under the screw to alleviate the plate's pressure. It works, but is equally a pain to capture 20g.
I think next I'll look into flattening the wire and see if that doesn't streamline the process more. All in all, though, I prefer my Archon a slight bit more.
I can get a more dense vape with the stepdown airflow on the Archon and that's the biggest key, personally. Aeronaut still chucks some clouds and retains
good flavor. I'll just have to wait for more airflow tube options and see if I can't cinch both top and bottom airflow down to give that more warmer desired vape.
Ugh, dropped my Bellus on Saturday and broke the glass. The tank has a couple nicks but it's not a big deal. I'm so glad they come with an extra glass piece.
I'm going to try doing another build with longer tails so it'll hopefully leak less. I don't mind a few drops leaking when filling but mine kept leaking even if it was tilted a bit.
I also just got my 3 70/30 juices from Mech Sauce so I'm hoping the thinner liquid will help the tank wick easier. The max VG stuff didn't work so well in the tank.
I'm back to using the Derringer clone on the D2 for the time being.
that' was my first thought as i read your post regarding trapping the thick wires. the review that i watched on the aeronaut, the guy had some pretty gnarly stapled claptons or something. real thick. he took the coil out and it appeared he pounded on the ends of the leads.
yah man. that's why im still skeptical on getting of these. the goliath v2 gave me big time problems with leaking and then burned hits. i recoiled and rewicked it at least 10 times without success. tried different coils, loose wick, tight wick, shorter wick, longer wick. i couldn't figure it out.
that' was my first thought as i read your post regarding trapping the thick wires. the review that i watched on the aeronaut, the guy had some pretty gnarly stapled claptons or something. real thick. he took the coil out and it appeared he pounded on the ends of the leads.
yah man. that's why im still skeptical on getting of these. the goliath v2 gave me big time problems with leaking and then burned hits. i recoiled and rewicked it at least 10 times without success. tried different coils, loose wick, tight wick, shorter wick, longer wick. i couldn't figure it out.
Yea, Josh is the one who advised I do it this way since he was having trouble with stapled claptons. Some claptons have the ID but are softer still wire wise.
OK, so I rebuilt with longer tails. Still a crappy vape. I decided to watch some Bellus reviews/builds on Youtube and found out you're supposed to cut the tails down really, really short, so I trimmed the tails down and it vapes much, much better now. I can take it up to around 30 watts without it dry hitting and can take longer draws and chain vape without it dry hitting.
I am using 30PG/70VG juice, so it's much better than the max VG stuff.
yep, that's the vid i watched. ohmboy. so hows the airflow with top and bottom tubes work? don't they blow air into each other? seems like it would be bad for flavor or clouds set up in that config.
that's what i've found to work on my goblin mini. i tried it on the goliath v2 and got flooding.
yep, that's the vid i watched. ohmboy. so hows the airflow with top and bottom tubes work? don't they blow air into each other? seems like it would be bad for flavor or clouds set up in that config.