Unique Melody Bone Conduction Family (MEST&MEXT and their siblings) Announcement and Impression Thread.
Apr 14, 2022 at 4:22 PM Post #5,506 of 7,365
It looks like UM changed the faceplate to being flatter which is a good thing. I owned the original MEST MKII and the faceplate was more contoured which resulted in the metal “hats” falling off since they are just glued on. The contoured faceplate led to the hats not being glued on as well. Congrats on your purchase!

Thanks!

I can't speak to degree in which the original MEST MKII contours, but this one does have some. Like you said, it looks like the metal parts are solidly glued. Nonetheless, I'll keep an eye on them.
 
Apr 15, 2022 at 6:51 AM Post #5,507 of 7,365
Mest Mkii listed in classifieds :wink: Basically brand new as I bought it on Mar, 19 2022. EU sale only.
 
Apr 15, 2022 at 6:01 PM Post #5,508 of 7,365
Time to pour a drink and listen.

PS: Anyone have a good 4.4 to 3.5 converter? PW and Moon Audio seem to be the only ones; might just get a PW #10 2.5mm.
RDT_20220415_1600496676446702471852370.jpg


20220415_160916.jpg
 
Last edited:
Apr 15, 2022 at 6:20 PM Post #5,509 of 7,365
Apr 15, 2022 at 6:51 PM Post #5,511 of 7,365
Apr 15, 2022 at 8:25 PM Post #5,513 of 7,365
Apr 15, 2022 at 11:33 PM Post #5,516 of 7,365
For Shanling M9 owners with the Indigo, what gain level do you use?

I'm on Medium gain at the moment, seems significantly better than Low gain setting with better imaging.

As you go higher in M9 gain, the voltage is higher as well, and to my ears it improves performance of DD driver. Try Turbo as well.

1650079983475.png
 
Apr 16, 2022 at 12:15 AM Post #5,517 of 7,365
As you go higher in M9 gain, the voltage is higher as well, and to my ears it improves performance of DD driver. Try Turbo as well.

1650079983475.png
Turbo gain for iem? Will that be too much?
I thought increasing gain only increases the input signal amplitude and not voltage (power).
Is it specific to M9 that an increase in gain comes with increased voltage?
Also, my understanding is always to use the lowest gain level that provides sufficient volume, because a higher gain than needed will lead to distortion on frequencies......

Maybe the case with M9 is different, I'm eager to have your and anyone's advice and comments.

Thanks a lot!
 
Apr 16, 2022 at 12:33 AM Post #5,518 of 7,365
Turbo gain for iem? Will that be too much?
I thought increasing gain only increases the input signal amplitude and not voltage (power).
Is it specific to M9 that an increase in gain comes with increased voltage?
Also, my understanding is always to use the lowest gain level that provides sufficient volume, because a higher gain than needed will lead to distortion on frequencies......

Maybe the case with M9 is different, I'm eager to have your and anyone's advice and comments.

Thanks a lot!

What I posted above was a screenshot of M9 spec since you directed your question to M9 owners :wink: Of course, with turbo mode on you will have to lower the volume, but the voltage still scales up.
 
Apr 16, 2022 at 1:13 AM Post #5,520 of 7,365

Attachments

  • Screenshot_20220416-003624_Chrome.jpg
    Screenshot_20220416-003624_Chrome.jpg
    643.8 KB · Views: 0
Last edited:

Users who are viewing this thread

Back
Top