-
-
Jmarz reacted to drummerman1's post in the thread Chord Mojo 2 Thread ___ [product released January 31, 2022 -- starting on page 95 of thread] with Like.As OneEyed replied and as you probably know, there is no separate gain stage, only a multi level, stepped volume control. Chord rate low...
-
Jmarz reacted to Rob Watts's post in the thread Chord Mojo 2 Thread ___ [product released January 31, 2022 -- starting on page 95 of thread] with Like.The reason for 3v being Chord standard DAC OP is more historical. Going back to the 90's, it was common to use passive pre-amps (that is...
-
Jmarz reacted to Riversalt's post in the thread FiiO K7/K7BT Desktop DAC&Headphone AMP Discussion | XLR Balance | Dual THX AAA | Xmos | ... with Like.Finished... :beyersmile: @FiiO
-
Jmarz reacted to UniqueMelody's post in the thread Unique Melody Bone Conduction Family (MEST&MEXT and their siblings) Announcement and Impression Thread. with Like.Different and smaller shell, Upgraded BCD, Upgraded crossover board, Upgraded internal layout...
-
Jmarz reacted to HK_sends's post in the thread iBasso DX300 Qualcomm Snapdragon 660 Octa-core 6GB RAM ******NEW Firmware 2.00 Android 11****** with Like.Apologies if you already know this but with the upgrade file in your root folder/SD Card, open the updater then press the three-dots in...
-
Jmarz reacted to samandhi's post in the thread iBasso DX300 Qualcomm Snapdragon 660 Octa-core 6GB RAM ******NEW Firmware 2.00 Android 11****** with Like.Did you unzip it once? There is a zip file inside the downloaded zip file. The unzipped file should have a zipped file, and a readme...
-
Jmarz reacted to emdeevee's post in the thread Unique Melody Bone Conduction Family (MEST&MEXT and their siblings) Announcement and Impression Thread. with Like.By the way, speaking of indigos...mine come off their cable semi frequently, the pins not holding very tight. The flush design of the...
-
Jmarz reacted to galaxysound25's post in the thread Unique Melody Bone Conduction Family (MEST&MEXT and their siblings) Announcement and Impression Thread. with Like.How about Mest Mk2 cable, it is also loose with Indigo..in case somebody has both of them..
-
Jmarz reacted to emdeevee's post in the thread Unique Melody Bone Conduction Family (MEST&MEXT and their siblings) Announcement and Impression Thread. with Like.Every cable I put in the Indigos, tho I don't have the Mest ii. The plugs are a little easy to detach.
-
Jmarz reacted to Guacamolly's post in the thread Unique Melody Bone Conduction Family (MEST&MEXT and their siblings) Announcement and Impression Thread. with Like.I don't use the original mestmkii cable for this reason, too loose! Indigo's cable never been a problem for me.
-
Jmarz replied to the thread Unique Melody Bone Conduction Family (MEST&MEXT and their siblings) Announcement and Impression Thread..My original mest cable, on the right side, is too loose of a fit. And the IEM has once or twice slipped off the cable and landed on the...
-
Jmarz reacted to sicnesse's post in the thread iBasso DX300 Qualcomm Snapdragon 660 Octa-core 6GB RAM ******NEW Firmware 2.00 Android 11****** with Like.I just turn off the device completely when not in use. At least until it gets fixed
-
Jmarz reacted to samandhi's post in the thread iBasso DX300 Qualcomm Snapdragon 660 Octa-core 6GB RAM ******NEW Firmware 2.00 Android 11****** with Like.I did see the instructions, and while they are very clear and easy to follow, they didn't link to the image file needed to do this...
-
Jmarz replied to the thread iBasso DX300 Qualcomm Snapdragon 660 Octa-core 6GB RAM ******NEW Firmware 2.00 Android 11******.Thanks. I too was confused by what "standby" meant.
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…